Àlàyé ọkọ̀ · ẹ́ńjìnì · ẹ̀yà

Ìtọ́kasí ọkọ̀ àti ẹ̀yà

Ṣàyẹ̀wò ìran ọkọ̀, ẹ́ńjìnì àti àlàyé ẹ̀yà ọjà kí o tó rán ìbéèrè wá.

31ìran ọkọ̀ tó ní ìtọ́kasí

18ìtọ́kasí ẹ́ńjìnì

135ìtọ́kasí ẹ̀yà

Honda Accord 8th generation2008-20120 ìtọ́kasí ẹ́ńjìnì · 5 ìtọ́kasí ẹ̀yà

Ọjà: NG, GHÀwọn orúkọ tí a ń lò: Accord 2008, Accord 2010, Accord 2012Orísun ọjà · Orísun ọjà

Àlàyé ìtọ́kasí ẹ́ńjìnì

Àwọn pàtàkì yìí jẹ́ fún ìdánimọ̀. Ba ọjà, trim, kóòdù ẹ́ńjìnì àti VIN mu kí o tó paṣẹ.

Kò sí àlàyé ẹ́ńjìnì fún ìran yìí.

Àwọn pàtàkì ẹ̀yà àti ìyàtọ̀ ọjà

Ìtọ́kasí yìí bo àwọn àwọ̀n tó wọ́pọ̀ ní Nigeria àti Ghana. Kì í ṣe ẹ̀rí wíwà ní stock; fi label, OEM, VIN, connector àti ẹ̀yà gidi wé ara wọn kí o tó sọ owó.

Ẹ̀yà	Ọdún / ẹ́ńjìnì	Drive / body / steering	Àwọn pàtàkì ìtọ́kasí	Ìyàtọ̀ ọjà àti ìṣàyẹ̀wò	Ipò / orísun
Front bumper cover body · Front	2008-2012 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	North American, Japanese, European and other-market bumpers may differ in side markers, plate recess, fog lamps, radar and pedestrian-safety interfaces. Body style and Sport/standard trim must be confirmed. Ìṣàyẹ̀wò: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Ìwúlò àgbépọ̀: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check A ti pèsè ààyè fọ́tò
A/C compressor assembly climate · Engine-mounted	2008-2012 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Engine family, body style, market climate package and compressor control valve can change the correct assembly. Hybrid/electric compressor systems must be separated from belt-driven units. Ìṣàyẹ̀wò: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Ìwúlò àgbépọ̀: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check A ti pèsè ààyè fọ́tò
Radiator and cooling module cooling · Front	2008-2012 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: CVT, 6MT, 9AT, 10AT	Drive: 2WD Body: sedan Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Engine displacement, turbo/non-turbo, CVT/automatic transmission and hybrid equipment can change radiator and fan assemblies. Market emissions and condenser/fan-control packages must be checked separately. Ìṣàyẹ̀wò: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Ìwúlò àgbépọ̀: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label A ti pèsè ààyè fọ́tò
Alternator assembly electrical · Engine-mounted	2008-2012 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	Engine family, trim, stop-start/idle-stop and market charging control can change regulator, plug and rated output. Accord/Civic/CR-V petrol and hybrid systems require separate checks. Ìṣàyẹ̀wò: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Ìwúlò àgbépọ̀: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record A ti pèsè ààyè fọ́tò
Front headlamp assembly lighting · LH/RH	2008-2012 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	US, Japan, EU and other-market lamps can differ in beam pattern, DRL, side marker, AFS and connector. Sedan, coupe, hatchback and SUV body variants require separate verification. Ìṣàyẹ̀wò: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Ìwúlò àgbépọ̀: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison A ti pèsè ààyè fọ́tò

Béèrè nípa ọkọ̀ tàbí ẹ̀yà

Honda Accord 9th generation2013-20170 ìtọ́kasí ẹ́ńjìnì · 5 ìtọ́kasí ẹ̀yà

Ọjà: NG, GHÀwọn orúkọ tí a ń lò: Accord 2014, Accord 2015, Accord 2017Orísun ọjà · Orísun ọjà

Àlàyé ìtọ́kasí ẹ́ńjìnì

Àwọn pàtàkì yìí jẹ́ fún ìdánimọ̀. Ba ọjà, trim, kóòdù ẹ́ńjìnì àti VIN mu kí o tó paṣẹ.

Kò sí àlàyé ẹ́ńjìnì fún ìran yìí.

Àwọn pàtàkì ẹ̀yà àti ìyàtọ̀ ọjà

Ẹ̀yà	Ọdún / ẹ́ńjìnì	Drive / body / steering	Àwọn pàtàkì ìtọ́kasí	Ìyàtọ̀ ọjà àti ìṣàyẹ̀wò	Ipò / orísun
Front bumper cover body · Front	2013-2017 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	North American, Japanese, European and other-market bumpers may differ in side markers, plate recess, fog lamps, radar and pedestrian-safety interfaces. Body style and Sport/standard trim must be confirmed. Ìṣàyẹ̀wò: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Ìwúlò àgbépọ̀: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check A ti pèsè ààyè fọ́tò
A/C compressor assembly climate · Engine-mounted	2013-2017 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Engine family, body style, market climate package and compressor control valve can change the correct assembly. Hybrid/electric compressor systems must be separated from belt-driven units. Ìṣàyẹ̀wò: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Ìwúlò àgbépọ̀: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check A ti pèsè ààyè fọ́tò
Radiator and cooling module cooling · Front	2013-2017 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: CVT, 6MT, 9AT, 10AT	Drive: 2WD Body: sedan Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Engine displacement, turbo/non-turbo, CVT/automatic transmission and hybrid equipment can change radiator and fan assemblies. Market emissions and condenser/fan-control packages must be checked separately. Ìṣàyẹ̀wò: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Ìwúlò àgbépọ̀: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label A ti pèsè ààyè fọ́tò
Alternator assembly electrical · Engine-mounted	2013-2017 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	Engine family, trim, stop-start/idle-stop and market charging control can change regulator, plug and rated output. Accord/Civic/CR-V petrol and hybrid systems require separate checks. Ìṣàyẹ̀wò: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Ìwúlò àgbépọ̀: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record A ti pèsè ààyè fọ́tò
Front headlamp assembly lighting · LH/RH	2013-2017 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	US, Japan, EU and other-market lamps can differ in beam pattern, DRL, side marker, AFS and connector. Sedan, coupe, hatchback and SUV body variants require separate verification. Ìṣàyẹ̀wò: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Ìwúlò àgbépọ̀: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison A ti pèsè ààyè fọ́tò

Béèrè nípa ọkọ̀ tàbí ẹ̀yà

Honda Accord 10th generation2018-20222 ìtọ́kasí ẹ́ńjìnì · 5 ìtọ́kasí ẹ̀yà

Ọjà: NG, GHÀwọn orúkọ tí a ń lò: Accord 2018, Accord 2020, Accord 2022Orísun ọjà · Orísun ọjà

Àlàyé ìtọ́kasí ẹ́ńjìnì

Àwọn pàtàkì yìí jẹ́ fún ìdánimọ̀. Ba ọjà, trim, kóòdù ẹ́ńjìnì àti VIN mu kí o tó paṣẹ.

Ẹ́ńjìnì	Iwọn ẹ́ńjìnì	Fuel / induction	Agbara ìtọ́kasí	Gearbox / orísun	Orísun / fọ́tò
K20C4 2.0L direct-injection turbo 4-cylinder	2 L 4 cylinder	Gasoline Turbocharged	252 hp · 370 Nm	10-speed automatic	A ti pèsè ààyè fọ́tò 2018 Honda Accord official brochure Ìtọ́kasí · a ti pèsè ààyè fọ́tò
L15BE 1.5L direct-injection turbo 4-cylinder	1.5 L 4 cylinder	Gasoline Turbocharged	192 hp · 260 Nm	CVT	A ti pèsè ààyè fọ́tò 2018 Honda Accord official brochure Ìtọ́kasí · a ti pèsè ààyè fọ́tò

Àwọn pàtàkì ẹ̀yà àti ìyàtọ̀ ọjà

Ẹ̀yà	Ọdún / ẹ́ńjìnì	Drive / body / steering	Àwọn pàtàkì ìtọ́kasí	Ìyàtọ̀ ọjà àti ìṣàyẹ̀wò	Ipò / orísun
Front bumper cover body · Front	2018-2022 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	North American, Japanese, European and other-market bumpers may differ in side markers, plate recess, fog lamps, radar and pedestrian-safety interfaces. Body style and Sport/standard trim must be confirmed. Ìṣàyẹ̀wò: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Ìwúlò àgbépọ̀: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check A ti pèsè ààyè fọ́tò
A/C compressor assembly climate · Engine-mounted	2018-2022 Àwọn ẹ́ńjìnì: K20C4, L15BE Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Engine family, body style, market climate package and compressor control valve can change the correct assembly. Hybrid/electric compressor systems must be separated from belt-driven units. Ìṣàyẹ̀wò: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Ìwúlò àgbépọ̀: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check A ti pèsè ààyè fọ́tò
Radiator and cooling module cooling · Front	2018-2022 Àwọn ẹ́ńjìnì: K20C4, L15BE Gearbox: CVT, 6MT, 9AT, 10AT	Drive: 2WD Body: sedan Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Engine displacement, turbo/non-turbo, CVT/automatic transmission and hybrid equipment can change radiator and fan assemblies. Market emissions and condenser/fan-control packages must be checked separately. Ìṣàyẹ̀wò: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Ìwúlò àgbépọ̀: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label A ti pèsè ààyè fọ́tò
Alternator assembly electrical · Engine-mounted	2018-2022 Àwọn ẹ́ńjìnì: K20C4, L15BE Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	Engine family, trim, stop-start/idle-stop and market charging control can change regulator, plug and rated output. Accord/Civic/CR-V petrol and hybrid systems require separate checks. Ìṣàyẹ̀wò: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Ìwúlò àgbépọ̀: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record A ti pèsè ààyè fọ́tò
Front headlamp assembly lighting · LH/RH	2018-2022 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	US, Japan, EU and other-market lamps can differ in beam pattern, DRL, side marker, AFS and connector. Sedan, coupe, hatchback and SUV body variants require separate verification. Ìṣàyẹ̀wò: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Ìwúlò àgbépọ̀: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison A ti pèsè ààyè fọ́tò

Béèrè nípa ọkọ̀ tàbí ẹ̀yà

Honda CR-V 3rd generation2007-20110 ìtọ́kasí ẹ́ńjìnì · 5 ìtọ́kasí ẹ̀yà

Ọjà: NG, GHÀwọn orúkọ tí a ń lò: CR-V 2008, CR-V 2010, CR-V 2011Orísun ọjà · Orísun ọjà

Àlàyé ìtọ́kasí ẹ́ńjìnì

Àwọn pàtàkì yìí jẹ́ fún ìdánimọ̀. Ba ọjà, trim, kóòdù ẹ́ńjìnì àti VIN mu kí o tó paṣẹ.

Kò sí àlàyé ẹ́ńjìnì fún ìran yìí.

Àwọn pàtàkì ẹ̀yà àti ìyàtọ̀ ọjà

Ẹ̀yà	Ọdún / ẹ́ńjìnì	Drive / body / steering	Àwọn pàtàkì ìtọ́kasí	Ìyàtọ̀ ọjà àti ìṣàyẹ̀wò	Ipò / orísun
Front bumper cover body · Front	2007-2011 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: SUV Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	North American, Japanese, European and other-market bumpers may differ in side markers, plate recess, fog lamps, radar and pedestrian-safety interfaces. Body style and Sport/standard trim must be confirmed. Ìṣàyẹ̀wò: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Ìwúlò àgbépọ̀: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check A ti pèsè ààyè fọ́tò
A/C compressor assembly climate · Engine-mounted	2007-2011 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: SUV Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Engine family, body style, market climate package and compressor control valve can change the correct assembly. Hybrid/electric compressor systems must be separated from belt-driven units. Ìṣàyẹ̀wò: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Ìwúlò àgbépọ̀: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check A ti pèsè ààyè fọ́tò
Radiator and cooling module cooling · Front	2007-2011 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: CVT, 6MT, 9AT, 10AT	Drive: 2WD Body: SUV Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Engine displacement, turbo/non-turbo, CVT/automatic transmission and hybrid equipment can change radiator and fan assemblies. Market emissions and condenser/fan-control packages must be checked separately. Ìṣàyẹ̀wò: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Ìwúlò àgbépọ̀: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label A ti pèsè ààyè fọ́tò
Alternator assembly electrical · Engine-mounted	2007-2011 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: SUV Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	Engine family, trim, stop-start/idle-stop and market charging control can change regulator, plug and rated output. Accord/Civic/CR-V petrol and hybrid systems require separate checks. Ìṣàyẹ̀wò: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Ìwúlò àgbépọ̀: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record A ti pèsè ààyè fọ́tò
Front headlamp assembly lighting · LH/RH	2007-2011 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: SUV Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	US, Japan, EU and other-market lamps can differ in beam pattern, DRL, side marker, AFS and connector. Sedan, coupe, hatchback and SUV body variants require separate verification. Ìṣàyẹ̀wò: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Ìwúlò àgbépọ̀: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison A ti pèsè ààyè fọ́tò

Béèrè nípa ọkọ̀ tàbí ẹ̀yà

Honda CR-V 4th generation2012-20160 ìtọ́kasí ẹ́ńjìnì · 5 ìtọ́kasí ẹ̀yà

Ọjà: NG, GHÀwọn orúkọ tí a ń lò: CR-V 2013, CR-V 2015, CR-V 2016Orísun ọjà · Orísun ọjà

Àlàyé ìtọ́kasí ẹ́ńjìnì

Àwọn pàtàkì yìí jẹ́ fún ìdánimọ̀. Ba ọjà, trim, kóòdù ẹ́ńjìnì àti VIN mu kí o tó paṣẹ.

Kò sí àlàyé ẹ́ńjìnì fún ìran yìí.

Àwọn pàtàkì ẹ̀yà àti ìyàtọ̀ ọjà

Ẹ̀yà	Ọdún / ẹ́ńjìnì	Drive / body / steering	Àwọn pàtàkì ìtọ́kasí	Ìyàtọ̀ ọjà àti ìṣàyẹ̀wò	Ipò / orísun
Front bumper cover body · Front	2012-2016 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: SUV Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	North American, Japanese, European and other-market bumpers may differ in side markers, plate recess, fog lamps, radar and pedestrian-safety interfaces. Body style and Sport/standard trim must be confirmed. Ìṣàyẹ̀wò: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Ìwúlò àgbépọ̀: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check A ti pèsè ààyè fọ́tò
A/C compressor assembly climate · Engine-mounted	2012-2016 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: SUV Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Engine family, body style, market climate package and compressor control valve can change the correct assembly. Hybrid/electric compressor systems must be separated from belt-driven units. Ìṣàyẹ̀wò: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Ìwúlò àgbépọ̀: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check A ti pèsè ààyè fọ́tò
Radiator and cooling module cooling · Front	2012-2016 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: CVT, 6MT, 9AT, 10AT	Drive: 2WD Body: SUV Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Engine displacement, turbo/non-turbo, CVT/automatic transmission and hybrid equipment can change radiator and fan assemblies. Market emissions and condenser/fan-control packages must be checked separately. Ìṣàyẹ̀wò: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Ìwúlò àgbépọ̀: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label A ti pèsè ààyè fọ́tò
Alternator assembly electrical · Engine-mounted	2012-2016 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: SUV Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	Engine family, trim, stop-start/idle-stop and market charging control can change regulator, plug and rated output. Accord/Civic/CR-V petrol and hybrid systems require separate checks. Ìṣàyẹ̀wò: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Ìwúlò àgbépọ̀: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record A ti pèsè ààyè fọ́tò
Front headlamp assembly lighting · LH/RH	2012-2016 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: SUV Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	US, Japan, EU and other-market lamps can differ in beam pattern, DRL, side marker, AFS and connector. Sedan, coupe, hatchback and SUV body variants require separate verification. Ìṣàyẹ̀wò: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Ìwúlò àgbépọ̀: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison A ti pèsè ààyè fọ́tò

Béèrè nípa ọkọ̀ tàbí ẹ̀yà

Honda CR-V 5th generation2017-20221 ìtọ́kasí ẹ́ńjìnì · 5 ìtọ́kasí ẹ̀yà

Ọjà: NG, GHÀwọn orúkọ tí a ń lò: CR-V 2018, CR-V 2020, CR-V 2022Orísun ọjà · Orísun ọjà

Àlàyé ìtọ́kasí ẹ́ńjìnì

Àwọn pàtàkì yìí jẹ́ fún ìdánimọ̀. Ba ọjà, trim, kóòdù ẹ́ńjìnì àti VIN mu kí o tó paṣẹ.

Ẹ́ńjìnì	Iwọn ẹ́ńjìnì	Fuel / induction	Agbara ìtọ́kasí	Gearbox / orísun	Orísun / fọ́tò
L15B7 1.5L direct-injection turbo 4-cylinder	1.5 L 4 cylinder	Gasoline Turbocharged	190 hp	CVT	A ti pèsè ààyè fọ́tò Honda Global 2017 CR-V powertrain announcement Ìtọ́kasí · a ti pèsè ààyè fọ́tò

Àwọn pàtàkì ẹ̀yà àti ìyàtọ̀ ọjà

Ẹ̀yà	Ọdún / ẹ́ńjìnì	Drive / body / steering	Àwọn pàtàkì ìtọ́kasí	Ìyàtọ̀ ọjà àti ìṣàyẹ̀wò	Ipò / orísun
Front bumper cover body · Front	2017-2022 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: SUV Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	North American, Japanese, European and other-market bumpers may differ in side markers, plate recess, fog lamps, radar and pedestrian-safety interfaces. Body style and Sport/standard trim must be confirmed. Ìṣàyẹ̀wò: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Ìwúlò àgbépọ̀: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check A ti pèsè ààyè fọ́tò
A/C compressor assembly climate · Engine-mounted	2017-2022 Àwọn ẹ́ńjìnì: L15B7 Gearbox: A kò pèsè	Drive: 2WD Body: SUV Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Engine family, body style, market climate package and compressor control valve can change the correct assembly. Hybrid/electric compressor systems must be separated from belt-driven units. Ìṣàyẹ̀wò: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Ìwúlò àgbépọ̀: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check A ti pèsè ààyè fọ́tò
Radiator and cooling module cooling · Front	2017-2022 Àwọn ẹ́ńjìnì: L15B7 Gearbox: CVT, 6MT, 9AT, 10AT	Drive: 2WD Body: SUV Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Engine displacement, turbo/non-turbo, CVT/automatic transmission and hybrid equipment can change radiator and fan assemblies. Market emissions and condenser/fan-control packages must be checked separately. Ìṣàyẹ̀wò: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Ìwúlò àgbépọ̀: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label A ti pèsè ààyè fọ́tò
Alternator assembly electrical · Engine-mounted	2017-2022 Àwọn ẹ́ńjìnì: L15B7 Gearbox: A kò pèsè	Drive: 2WD Body: SUV Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	Engine family, trim, stop-start/idle-stop and market charging control can change regulator, plug and rated output. Accord/Civic/CR-V petrol and hybrid systems require separate checks. Ìṣàyẹ̀wò: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Ìwúlò àgbépọ̀: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record A ti pèsè ààyè fọ́tò
Front headlamp assembly lighting · LH/RH	2017-2022 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: SUV Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	US, Japan, EU and other-market lamps can differ in beam pattern, DRL, side marker, AFS and connector. Sedan, coupe, hatchback and SUV body variants require separate verification. Ìṣàyẹ̀wò: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Ìwúlò àgbépọ̀: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison A ti pèsè ààyè fọ́tò

Béèrè nípa ọkọ̀ tàbí ẹ̀yà

Honda Civic 8th generation2006-20110 ìtọ́kasí ẹ́ńjìnì · 5 ìtọ́kasí ẹ̀yà

Ọjà: NG, GHÀwọn orúkọ tí a ń lò: Civic 2007, Civic 2009, Civic 2011Orísun ọjà · Orísun ọjà

Àlàyé ìtọ́kasí ẹ́ńjìnì

Àwọn pàtàkì yìí jẹ́ fún ìdánimọ̀. Ba ọjà, trim, kóòdù ẹ́ńjìnì àti VIN mu kí o tó paṣẹ.

Kò sí àlàyé ẹ́ńjìnì fún ìran yìí.

Àwọn pàtàkì ẹ̀yà àti ìyàtọ̀ ọjà

Ẹ̀yà	Ọdún / ẹ́ńjìnì	Drive / body / steering	Àwọn pàtàkì ìtọ́kasí	Ìyàtọ̀ ọjà àti ìṣàyẹ̀wò	Ipò / orísun
Front bumper cover body · Front	2006-2011 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	North American, Japanese, European and other-market bumpers may differ in side markers, plate recess, fog lamps, radar and pedestrian-safety interfaces. Body style and Sport/standard trim must be confirmed. Ìṣàyẹ̀wò: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Ìwúlò àgbépọ̀: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check A ti pèsè ààyè fọ́tò
A/C compressor assembly climate · Engine-mounted	2006-2011 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Engine family, body style, market climate package and compressor control valve can change the correct assembly. Hybrid/electric compressor systems must be separated from belt-driven units. Ìṣàyẹ̀wò: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Ìwúlò àgbépọ̀: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check A ti pèsè ààyè fọ́tò
Radiator and cooling module cooling · Front	2006-2011 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: CVT, 6MT, 9AT, 10AT	Drive: 2WD Body: sedan Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Engine displacement, turbo/non-turbo, CVT/automatic transmission and hybrid equipment can change radiator and fan assemblies. Market emissions and condenser/fan-control packages must be checked separately. Ìṣàyẹ̀wò: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Ìwúlò àgbépọ̀: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label A ti pèsè ààyè fọ́tò
Alternator assembly electrical · Engine-mounted	2006-2011 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	Engine family, trim, stop-start/idle-stop and market charging control can change regulator, plug and rated output. Accord/Civic/CR-V petrol and hybrid systems require separate checks. Ìṣàyẹ̀wò: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Ìwúlò àgbépọ̀: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record A ti pèsè ààyè fọ́tò
Front headlamp assembly lighting · LH/RH	2006-2011 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	US, Japan, EU and other-market lamps can differ in beam pattern, DRL, side marker, AFS and connector. Sedan, coupe, hatchback and SUV body variants require separate verification. Ìṣàyẹ̀wò: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Ìwúlò àgbépọ̀: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison A ti pèsè ààyè fọ́tò

Béèrè nípa ọkọ̀ tàbí ẹ̀yà

Honda Civic 9th generation2012-20150 ìtọ́kasí ẹ́ńjìnì · 5 ìtọ́kasí ẹ̀yà

Ọjà: NG, GHÀwọn orúkọ tí a ń lò: Civic 2012, Civic 2014, Civic 2015Orísun ọjà · Orísun ọjà

Àlàyé ìtọ́kasí ẹ́ńjìnì

Àwọn pàtàkì yìí jẹ́ fún ìdánimọ̀. Ba ọjà, trim, kóòdù ẹ́ńjìnì àti VIN mu kí o tó paṣẹ.

Kò sí àlàyé ẹ́ńjìnì fún ìran yìí.

Àwọn pàtàkì ẹ̀yà àti ìyàtọ̀ ọjà

Ẹ̀yà	Ọdún / ẹ́ńjìnì	Drive / body / steering	Àwọn pàtàkì ìtọ́kasí	Ìyàtọ̀ ọjà àti ìṣàyẹ̀wò	Ipò / orísun
Front bumper cover body · Front	2012-2015 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	North American, Japanese, European and other-market bumpers may differ in side markers, plate recess, fog lamps, radar and pedestrian-safety interfaces. Body style and Sport/standard trim must be confirmed. Ìṣàyẹ̀wò: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Ìwúlò àgbépọ̀: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check A ti pèsè ààyè fọ́tò
A/C compressor assembly climate · Engine-mounted	2012-2015 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Engine family, body style, market climate package and compressor control valve can change the correct assembly. Hybrid/electric compressor systems must be separated from belt-driven units. Ìṣàyẹ̀wò: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Ìwúlò àgbépọ̀: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check A ti pèsè ààyè fọ́tò
Radiator and cooling module cooling · Front	2012-2015 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: CVT, 6MT, 9AT, 10AT	Drive: 2WD Body: sedan Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Engine displacement, turbo/non-turbo, CVT/automatic transmission and hybrid equipment can change radiator and fan assemblies. Market emissions and condenser/fan-control packages must be checked separately. Ìṣàyẹ̀wò: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Ìwúlò àgbépọ̀: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label A ti pèsè ààyè fọ́tò
Alternator assembly electrical · Engine-mounted	2012-2015 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	Engine family, trim, stop-start/idle-stop and market charging control can change regulator, plug and rated output. Accord/Civic/CR-V petrol and hybrid systems require separate checks. Ìṣàyẹ̀wò: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Ìwúlò àgbépọ̀: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record A ti pèsè ààyè fọ́tò
Front headlamp assembly lighting · LH/RH	2012-2015 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	US, Japan, EU and other-market lamps can differ in beam pattern, DRL, side marker, AFS and connector. Sedan, coupe, hatchback and SUV body variants require separate verification. Ìṣàyẹ̀wò: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Ìwúlò àgbépọ̀: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison A ti pèsè ààyè fọ́tò

Béèrè nípa ọkọ̀ tàbí ẹ̀yà

Honda Civic 10th generation2016-20211 ìtọ́kasí ẹ́ńjìnì · 5 ìtọ́kasí ẹ̀yà

Ọjà: NG, GHÀwọn orúkọ tí a ń lò: Civic 2017, Civic 2019, Civic 2021Orísun ọjà · Orísun ọjà

Àlàyé ìtọ́kasí ẹ́ńjìnì

Àwọn pàtàkì yìí jẹ́ fún ìdánimọ̀. Ba ọjà, trim, kóòdù ẹ́ńjìnì àti VIN mu kí o tó paṣẹ.

Ẹ́ńjìnì	Iwọn ẹ́ńjìnì	Fuel / induction	Agbara ìtọ́kasí	Gearbox / orísun	Orísun / fọ́tò
L15B7 1.5L direct-injection turbo 4-cylinder	1.5 L 4 cylinder	Gasoline Turbocharged	174 hp · 220 Nm	CVT or 6-speed manual	A ti pèsè ààyè fọ́tò 2017 Honda Civic official brochure Ìtọ́kasí · a ti pèsè ààyè fọ́tò

Àwọn pàtàkì ẹ̀yà àti ìyàtọ̀ ọjà

Ẹ̀yà	Ọdún / ẹ́ńjìnì	Drive / body / steering	Àwọn pàtàkì ìtọ́kasí	Ìyàtọ̀ ọjà àti ìṣàyẹ̀wò	Ipò / orísun
Front bumper cover body · Front	2016-2021 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	North American, Japanese, European and other-market bumpers may differ in side markers, plate recess, fog lamps, radar and pedestrian-safety interfaces. Body style and Sport/standard trim must be confirmed. Ìṣàyẹ̀wò: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Ìwúlò àgbépọ̀: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check A ti pèsè ààyè fọ́tò
A/C compressor assembly climate · Engine-mounted	2016-2021 Àwọn ẹ́ńjìnì: L15B7 Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Engine family, body style, market climate package and compressor control valve can change the correct assembly. Hybrid/electric compressor systems must be separated from belt-driven units. Ìṣàyẹ̀wò: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Ìwúlò àgbépọ̀: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check A ti pèsè ààyè fọ́tò
Radiator and cooling module cooling · Front	2016-2021 Àwọn ẹ́ńjìnì: L15B7 Gearbox: CVT, 6MT, 9AT, 10AT	Drive: 2WD Body: sedan Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Engine displacement, turbo/non-turbo, CVT/automatic transmission and hybrid equipment can change radiator and fan assemblies. Market emissions and condenser/fan-control packages must be checked separately. Ìṣàyẹ̀wò: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Ìwúlò àgbépọ̀: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label A ti pèsè ààyè fọ́tò
Alternator assembly electrical · Engine-mounted	2016-2021 Àwọn ẹ́ńjìnì: L15B7 Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	Engine family, trim, stop-start/idle-stop and market charging control can change regulator, plug and rated output. Accord/Civic/CR-V petrol and hybrid systems require separate checks. Ìṣàyẹ̀wò: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Ìwúlò àgbépọ̀: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record A ti pèsè ààyè fọ́tò
Front headlamp assembly lighting · LH/RH	2016-2021 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	US, Japan, EU and other-market lamps can differ in beam pattern, DRL, side marker, AFS and connector. Sedan, coupe, hatchback and SUV body variants require separate verification. Ìṣàyẹ̀wò: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Ìwúlò àgbépọ̀: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison A ti pèsè ààyè fọ́tò

Béèrè nípa ọkọ̀ tàbí ẹ̀yà

Lexus RX AL102009-20150 ìtọ́kasí ẹ́ńjìnì · 5 ìtọ́kasí ẹ̀yà

Ọjà: NG, GHÀwọn orúkọ tí a ń lò: RX350 2010, RX330, RX450hOrísun ọjà · Orísun ọjà

Àlàyé ìtọ́kasí ẹ́ńjìnì

Àwọn pàtàkì yìí jẹ́ fún ìdánimọ̀. Ba ọjà, trim, kóòdù ẹ́ńjìnì àti VIN mu kí o tó paṣẹ.

Kò sí àlàyé ẹ́ńjìnì fún ìran yìí.

Àwọn pàtàkì ẹ̀yà àti ìyàtọ̀ ọjà

Ẹ̀yà	Ọdún / ẹ́ńjìnì	Drive / body / steering	Àwọn pàtàkì ìtọ́kasí	Ìyàtọ̀ ọjà àti ìṣàyẹ̀wò	Ipò / orísun
Front bumper cover body · Front	2009-2015 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: SUV Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	Market, body style, trim, facelift, sensor equipment and steering side must be confirmed before interchange. Ìṣàyẹ̀wò: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Ìwúlò àgbépọ̀: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check A ti pèsè ààyè fọ́tò
A/C compressor assembly climate · Engine-mounted	2009-2015 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: SUV Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Hybrid and non-hybrid compressors are different systems; match grade, engine and high-voltage/electric architecture. Ìṣàyẹ̀wò: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Ìwúlò àgbépọ̀: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check A ti pèsè ààyè fọ́tò
Radiator and cooling module cooling · Front	2009-2015 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: SUV Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Engine, transmission, drivetrain, climate package and market equipment must be confirmed from the donor vehicle. Ìṣàyẹ̀wò: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Ìwúlò àgbépọ̀: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label A ti pèsè ààyè fọ́tò
Alternator assembly electrical · Engine-mounted	2009-2015 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: SUV Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	Hybrid and non-hybrid charging systems are different; match the exact grade, engine and electrical architecture. Ìṣàyẹ̀wò: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Ìwúlò àgbépọ̀: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record A ti pèsè ààyè fọ́tò
Front headlamp assembly lighting · LH/RH	2009-2015 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: SUV Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	Market, body style, trim, facelift, steering side and lamp technology must be confirmed from the donor unit. Ìṣàyẹ̀wò: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Ìwúlò àgbépọ̀: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison A ti pèsè ààyè fọ́tò

Béèrè nípa ọkọ̀ tàbí ẹ̀yà

Lexus RX AL202016-20221 ìtọ́kasí ẹ́ńjìnì · 5 ìtọ́kasí ẹ̀yà

Ọjà: NG, GHÀwọn orúkọ tí a ń lò: RX350 2017, RX450h 2018, RX 2020Orísun ọjà · Orísun ọjà

Àlàyé ìtọ́kasí ẹ́ńjìnì

Àwọn pàtàkì yìí jẹ́ fún ìdánimọ̀. Ba ọjà, trim, kóòdù ẹ́ńjìnì àti VIN mu kí o tó paṣẹ.

Ẹ́ńjìnì	Iwọn ẹ́ńjìnì	Fuel / induction	Agbara ìtọ́kasí	Gearbox / orísun	Orísun / fọ́tò
2GR-FKS 3.5L direct-injection V6	3.5 L 6 cylinder	Gasoline Naturally aspirated	295 hp · 362 Nm	8-speed automatic	A ti pèsè ààyè fọ́tò 2016 Lexus RX official product information Ìtọ́kasí · a ti pèsè ààyè fọ́tò

Àwọn pàtàkì ẹ̀yà àti ìyàtọ̀ ọjà

Ẹ̀yà	Ọdún / ẹ́ńjìnì	Drive / body / steering	Àwọn pàtàkì ìtọ́kasí	Ìyàtọ̀ ọjà àti ìṣàyẹ̀wò	Ipò / orísun
Front bumper cover body · Front	2016-2022 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: SUV Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	Market, body style, trim, facelift, sensor equipment and steering side must be confirmed before interchange. Ìṣàyẹ̀wò: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Ìwúlò àgbépọ̀: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check A ti pèsè ààyè fọ́tò
A/C compressor assembly climate · Engine-mounted	2016-2022 Àwọn ẹ́ńjìnì: 2GR-FKS Gearbox: A kò pèsè	Drive: 2WD Body: SUV Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Hybrid and non-hybrid compressors are different systems; match grade, engine and high-voltage/electric architecture. Ìṣàyẹ̀wò: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Ìwúlò àgbépọ̀: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check A ti pèsè ààyè fọ́tò
Radiator and cooling module cooling · Front	2016-2022 Àwọn ẹ́ńjìnì: 2GR-FKS Gearbox: A kò pèsè	Drive: 2WD Body: SUV Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Engine, transmission, drivetrain, climate package and market equipment must be confirmed from the donor vehicle. Ìṣàyẹ̀wò: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Ìwúlò àgbépọ̀: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label A ti pèsè ààyè fọ́tò
Alternator assembly electrical · Engine-mounted	2016-2022 Àwọn ẹ́ńjìnì: 2GR-FKS Gearbox: A kò pèsè	Drive: 2WD Body: SUV Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	Hybrid and non-hybrid charging systems are different; match the exact grade, engine and electrical architecture. Ìṣàyẹ̀wò: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Ìwúlò àgbépọ̀: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record A ti pèsè ààyè fọ́tò
Front headlamp assembly lighting · LH/RH	2016-2022 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: SUV Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	Market, body style, trim, facelift, steering side and lamp technology must be confirmed from the donor unit. Ìṣàyẹ̀wò: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Ìwúlò àgbépọ̀: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison A ti pèsè ààyè fọ́tò

Béèrè nípa ọkọ̀ tàbí ẹ̀yà

Toyota Camry XV402006-20110 ìtọ́kasí ẹ́ńjìnì · 5 ìtọ́kasí ẹ̀yà

Ọjà: NG, GHÀwọn orúkọ tí a ń lò: Camry 2007, Camry 2009, Camry 2011Orísun ọjà · Orísun ọjà

Àlàyé ìtọ́kasí ẹ́ńjìnì

Àwọn pàtàkì yìí jẹ́ fún ìdánimọ̀. Ba ọjà, trim, kóòdù ẹ́ńjìnì àti VIN mu kí o tó paṣẹ.

Kò sí àlàyé ẹ́ńjìnì fún ìran yìí.

Àwọn pàtàkì ẹ̀yà àti ìyàtọ̀ ọjà

Ẹ̀yà	Ọdún / ẹ́ńjìnì	Drive / body / steering	Àwọn pàtàkì ìtọ́kasí	Ìyàtọ̀ ọjà àti ìṣàyẹ̀wò	Ipò / orísun
Front bumper cover body · Front	2006-2011 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	US/Canada, Japan, GCC and other-market bumper covers can differ in grille, reflector, fog-lamp, DRL and radar openings. Pre-facelift and facelift parts must be separated even within one chassis code. Ìṣàyẹ̀wò: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Ìwúlò àgbépọ̀: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check A ti pèsè ààyè fọ́tò
A/C compressor assembly climate · Engine-mounted	2006-2011 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Petrol, diesel and hybrid systems can use different compressor brackets, control methods and hose layouts. GCC, African-import, North American and Japanese-market climate packages may differ; country alone is not a fitment key. Ìṣàyẹ̀wò: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Ìwúlò àgbépọ̀: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check A ti pèsè ààyè fọ́tò
Radiator and cooling module cooling · Front	2006-2011 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: 6AT, 8AT	Drive: 2WD Body: sedan Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Petrol, hybrid and diesel systems use different cooling layouts; do not merge them. Automatic/CVT oil-cooler fittings and fan control can differ by market and trim. Ìṣàyẹ̀wò: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Ìwúlò àgbépọ̀: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label A ti pèsè ààyè fọ́tò
Alternator assembly electrical · Engine-mounted	2006-2011 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	The same model can use different alternators for petrol/diesel engines, engine displacement, stop-start, market emissions equipment and audio loads. Hybrid vehicles may use a different charging architecture and must not be treated as a conventional alternator match. Ìṣàyẹ̀wò: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Ìwúlò àgbépọ̀: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record A ti pèsè ààyè fọ́tò
Front headlamp assembly lighting · LH/RH	2006-2011 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	North American, Japanese and other-market lamps may differ in beam pattern, DRL, leveling motor, side marker and connector. Facelift and pre-facelift housings must not be mixed without comparing mounting points and OE suffix. Ìṣàyẹ̀wò: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Ìwúlò àgbépọ̀: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison A ti pèsè ààyè fọ́tò

Béèrè nípa ọkọ̀ tàbí ẹ̀yà

Toyota Camry XV502011-20170 ìtọ́kasí ẹ́ńjìnì · 5 ìtọ́kasí ẹ̀yà

Ọjà: NG, GHÀwọn orúkọ tí a ń lò: Camry 2012, Camry 2014, Camry 2016Orísun ọjà · Orísun ọjà

Àlàyé ìtọ́kasí ẹ́ńjìnì

Àwọn pàtàkì yìí jẹ́ fún ìdánimọ̀. Ba ọjà, trim, kóòdù ẹ́ńjìnì àti VIN mu kí o tó paṣẹ.

Kò sí àlàyé ẹ́ńjìnì fún ìran yìí.

Àwọn pàtàkì ẹ̀yà àti ìyàtọ̀ ọjà

Ẹ̀yà	Ọdún / ẹ́ńjìnì	Drive / body / steering	Àwọn pàtàkì ìtọ́kasí	Ìyàtọ̀ ọjà àti ìṣàyẹ̀wò	Ipò / orísun
Front bumper cover body · Front	2011-2017 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	US/Canada, Japan, GCC and other-market bumper covers can differ in grille, reflector, fog-lamp, DRL and radar openings. Pre-facelift and facelift parts must be separated even within one chassis code. Ìṣàyẹ̀wò: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Ìwúlò àgbépọ̀: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check A ti pèsè ààyè fọ́tò
A/C compressor assembly climate · Engine-mounted	2011-2017 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Petrol, diesel and hybrid systems can use different compressor brackets, control methods and hose layouts. GCC, African-import, North American and Japanese-market climate packages may differ; country alone is not a fitment key. Ìṣàyẹ̀wò: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Ìwúlò àgbépọ̀: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check A ti pèsè ààyè fọ́tò
Radiator and cooling module cooling · Front	2011-2017 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: 6AT, 8AT	Drive: 2WD Body: sedan Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Petrol, hybrid and diesel systems use different cooling layouts; do not merge them. Automatic/CVT oil-cooler fittings and fan control can differ by market and trim. Ìṣàyẹ̀wò: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Ìwúlò àgbépọ̀: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label A ti pèsè ààyè fọ́tò
Alternator assembly electrical · Engine-mounted	2011-2017 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	The same model can use different alternators for petrol/diesel engines, engine displacement, stop-start, market emissions equipment and audio loads. Hybrid vehicles may use a different charging architecture and must not be treated as a conventional alternator match. Ìṣàyẹ̀wò: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Ìwúlò àgbépọ̀: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record A ti pèsè ààyè fọ́tò
Front headlamp assembly lighting · LH/RH	2011-2017 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	North American, Japanese and other-market lamps may differ in beam pattern, DRL, leveling motor, side marker and connector. Facelift and pre-facelift housings must not be mixed without comparing mounting points and OE suffix. Ìṣàyẹ̀wò: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Ìwúlò àgbépọ̀: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison A ti pèsè ààyè fọ́tò

Béèrè nípa ọkọ̀ tàbí ẹ̀yà

Toyota Camry XV702017-20242 ìtọ́kasí ẹ́ńjìnì · 5 ìtọ́kasí ẹ̀yà

Ọjà: NG, GHÀwọn orúkọ tí a ń lò: Camry 2018, Camry 2020, Camry 2022Orísun ọjà · Orísun ọjà

Àlàyé ìtọ́kasí ẹ́ńjìnì

Àwọn pàtàkì yìí jẹ́ fún ìdánimọ̀. Ba ọjà, trim, kóòdù ẹ́ńjìnì àti VIN mu kí o tó paṣẹ.

Ẹ́ńjìnì	Iwọn ẹ́ńjìnì	Fuel / induction	Agbara ìtọ́kasí	Gearbox / orísun	Orísun / fọ́tò
2GR-FKS 3.5L V6	3.5 L 6 cylinder	Gasoline Naturally aspirated	301 hp · 362 Nm	8-speed automatic	A ti pèsè ààyè fọ́tò Toyota 2020 Camry Product Information Ìtọ́kasí · a ti pèsè ààyè fọ́tò
A25A-FKS 2.5L Dynamic Force 4-cylinder	2.5 L 4 cylinder	Gasoline Naturally aspirated	203 hp · 249 Nm	8-speed automatic	A ti pèsè ààyè fọ́tò Toyota 2020 Camry Product Information Ìtọ́kasí · a ti pèsè ààyè fọ́tò

Àwọn pàtàkì ẹ̀yà àti ìyàtọ̀ ọjà

Ẹ̀yà	Ọdún / ẹ́ńjìnì	Drive / body / steering	Àwọn pàtàkì ìtọ́kasí	Ìyàtọ̀ ọjà àti ìṣàyẹ̀wò	Ipò / orísun
Front bumper cover body · Front	2017-2024 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	US/Canada, Japan, GCC and other-market bumper covers can differ in grille, reflector, fog-lamp, DRL and radar openings. Pre-facelift and facelift parts must be separated even within one chassis code. Ìṣàyẹ̀wò: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Ìwúlò àgbépọ̀: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check A ti pèsè ààyè fọ́tò
A/C compressor assembly climate · Engine-mounted	2017-2024 Àwọn ẹ́ńjìnì: 2GR-FKS, A25A-FKS Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Petrol, diesel and hybrid systems can use different compressor brackets, control methods and hose layouts. GCC, African-import, North American and Japanese-market climate packages may differ; country alone is not a fitment key. Ìṣàyẹ̀wò: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Ìwúlò àgbépọ̀: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check A ti pèsè ààyè fọ́tò
Radiator and cooling module cooling · Front	2017-2024 Àwọn ẹ́ńjìnì: 2GR-FKS, A25A-FKS Gearbox: 6AT, 8AT	Drive: 2WD Body: sedan Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Petrol, hybrid and diesel systems use different cooling layouts; do not merge them. Automatic/CVT oil-cooler fittings and fan control can differ by market and trim. Ìṣàyẹ̀wò: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Ìwúlò àgbépọ̀: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label A ti pèsè ààyè fọ́tò
Alternator assembly electrical · Engine-mounted	2017-2024 Àwọn ẹ́ńjìnì: 2GR-FKS, A25A-FKS Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	The same model can use different alternators for petrol/diesel engines, engine displacement, stop-start, market emissions equipment and audio loads. Hybrid vehicles may use a different charging architecture and must not be treated as a conventional alternator match. Ìṣàyẹ̀wò: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Ìwúlò àgbépọ̀: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record A ti pèsè ààyè fọ́tò
Front headlamp assembly lighting · LH/RH	2017-2024 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	North American, Japanese and other-market lamps may differ in beam pattern, DRL, leveling motor, side marker and connector. Facelift and pre-facelift housings must not be mixed without comparing mounting points and OE suffix. Ìṣàyẹ̀wò: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Ìwúlò àgbépọ̀: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison A ti pèsè ààyè fọ́tò

Béèrè nípa ọkọ̀ tàbí ẹ̀yà

Toyota Corolla E140/E1502007-20130 ìtọ́kasí ẹ́ńjìnì · 5 ìtọ́kasí ẹ̀yà

Ọjà: NG, GHÀwọn orúkọ tí a ń lò: Corolla 2008, Corolla 2010, Corolla 2013Orísun ọjà · Orísun ọjà

Àlàyé ìtọ́kasí ẹ́ńjìnì

Àwọn pàtàkì yìí jẹ́ fún ìdánimọ̀. Ba ọjà, trim, kóòdù ẹ́ńjìnì àti VIN mu kí o tó paṣẹ.

Kò sí àlàyé ẹ́ńjìnì fún ìran yìí.

Àwọn pàtàkì ẹ̀yà àti ìyàtọ̀ ọjà

Ẹ̀yà	Ọdún / ẹ́ńjìnì	Drive / body / steering	Àwọn pàtàkì ìtọ́kasí	Ìyàtọ̀ ọjà àti ìṣàyẹ̀wò	Ipò / orísun
Front bumper cover body · Front	2007-2013 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	US/Canada, Japan, GCC and other-market bumper covers can differ in grille, reflector, fog-lamp, DRL and radar openings. Pre-facelift and facelift parts must be separated even within one chassis code. Ìṣàyẹ̀wò: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Ìwúlò àgbépọ̀: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check A ti pèsè ààyè fọ́tò
A/C compressor assembly climate · Engine-mounted	2007-2013 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Petrol, diesel and hybrid systems can use different compressor brackets, control methods and hose layouts. GCC, African-import, North American and Japanese-market climate packages may differ; country alone is not a fitment key. Ìṣàyẹ̀wò: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Ìwúlò àgbépọ̀: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check A ti pèsè ààyè fọ́tò
Radiator and cooling module cooling · Front	2007-2013 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: CVT, 6AT, 6MT	Drive: 2WD Body: sedan Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Petrol, hybrid and diesel systems use different cooling layouts; do not merge them. Automatic/CVT oil-cooler fittings and fan control can differ by market and trim. Ìṣàyẹ̀wò: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Ìwúlò àgbépọ̀: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label A ti pèsè ààyè fọ́tò
Alternator assembly electrical · Engine-mounted	2007-2013 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	The same model can use different alternators for petrol/diesel engines, engine displacement, stop-start, market emissions equipment and audio loads. Hybrid vehicles may use a different charging architecture and must not be treated as a conventional alternator match. Ìṣàyẹ̀wò: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Ìwúlò àgbépọ̀: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record A ti pèsè ààyè fọ́tò
Front headlamp assembly lighting · LH/RH	2007-2013 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	E140/E150, E170 and E210 lamps are not interchangeable by model name alone. NG/GH vehicles can include RHD imports and LHD North American imports; headlamp beam pattern and connector may differ. Sedan, hatchback/wagon, facelift and LED/halogen assemblies require separate confirmation. Ìṣàyẹ̀wò: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Ìwúlò àgbépọ̀: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison A ti pèsè ààyè fọ́tò

Béèrè nípa ọkọ̀ tàbí ẹ̀yà

Toyota Corolla E1702013-20191 ìtọ́kasí ẹ́ńjìnì · 5 ìtọ́kasí ẹ̀yà

Ọjà: NG, GHÀwọn orúkọ tí a ń lò: Corolla 2014, Corolla 2016, Corolla 2018Orísun ọjà · Orísun ọjà

Àlàyé ìtọ́kasí ẹ́ńjìnì

Àwọn pàtàkì yìí jẹ́ fún ìdánimọ̀. Ba ọjà, trim, kóòdù ẹ́ńjìnì àti VIN mu kí o tó paṣẹ.

Ẹ́ńjìnì	Iwọn ẹ́ńjìnì	Fuel / induction	Agbara ìtọ́kasí	Gearbox / orísun	Orísun / fọ́tò
2ZR-FE 1.8L VVT-i 4-cylinder	1.8 L 4 cylinder	Gasoline Naturally aspirated	132 hp · 173 Nm	CVT or 6-speed manual	A ti pèsè ààyè fọ́tò 2014 Toyota Corolla Product Information Ìtọ́kasí · a ti pèsè ààyè fọ́tò

Àwọn pàtàkì ẹ̀yà àti ìyàtọ̀ ọjà

Ẹ̀yà	Ọdún / ẹ́ńjìnì	Drive / body / steering	Àwọn pàtàkì ìtọ́kasí	Ìyàtọ̀ ọjà àti ìṣàyẹ̀wò	Ipò / orísun
Front bumper cover body · Front	2013-2019 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	US/Canada, Japan, GCC and other-market bumper covers can differ in grille, reflector, fog-lamp, DRL and radar openings. Pre-facelift and facelift parts must be separated even within one chassis code. Ìṣàyẹ̀wò: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Ìwúlò àgbépọ̀: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check A ti pèsè ààyè fọ́tò
A/C compressor assembly climate · Engine-mounted	2013-2019 Àwọn ẹ́ńjìnì: 2ZR-FE Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Petrol, diesel and hybrid systems can use different compressor brackets, control methods and hose layouts. GCC, African-import, North American and Japanese-market climate packages may differ; country alone is not a fitment key. Ìṣàyẹ̀wò: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Ìwúlò àgbépọ̀: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check A ti pèsè ààyè fọ́tò
Radiator and cooling module cooling · Front	2013-2019 Àwọn ẹ́ńjìnì: 2ZR-FE Gearbox: CVT, 6AT, 6MT	Drive: 2WD Body: sedan Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Petrol, hybrid and diesel systems use different cooling layouts; do not merge them. Automatic/CVT oil-cooler fittings and fan control can differ by market and trim. Ìṣàyẹ̀wò: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Ìwúlò àgbépọ̀: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label A ti pèsè ààyè fọ́tò
Alternator assembly electrical · Engine-mounted	2013-2019 Àwọn ẹ́ńjìnì: 2ZR-FE Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	The same model can use different alternators for petrol/diesel engines, engine displacement, stop-start, market emissions equipment and audio loads. Hybrid vehicles may use a different charging architecture and must not be treated as a conventional alternator match. Ìṣàyẹ̀wò: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Ìwúlò àgbépọ̀: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record A ti pèsè ààyè fọ́tò
Front headlamp assembly lighting · LH/RH	2013-2019 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	E140/E150, E170 and E210 lamps are not interchangeable by model name alone. NG/GH vehicles can include RHD imports and LHD North American imports; headlamp beam pattern and connector may differ. Sedan, hatchback/wagon, facelift and LED/halogen assemblies require separate confirmation. Ìṣàyẹ̀wò: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Ìwúlò àgbépọ̀: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison A ti pèsè ààyè fọ́tò

Béèrè nípa ọkọ̀ tàbí ẹ̀yà

Toyota Corolla E2102019-20250 ìtọ́kasí ẹ́ńjìnì · 5 ìtọ́kasí ẹ̀yà

Ọjà: NG, GHÀwọn orúkọ tí a ń lò: Corolla 2020, Corolla 2022, Corolla 2024Orísun ọjà · Orísun ọjà

Àlàyé ìtọ́kasí ẹ́ńjìnì

Àwọn pàtàkì yìí jẹ́ fún ìdánimọ̀. Ba ọjà, trim, kóòdù ẹ́ńjìnì àti VIN mu kí o tó paṣẹ.

Kò sí àlàyé ẹ́ńjìnì fún ìran yìí.

Àwọn pàtàkì ẹ̀yà àti ìyàtọ̀ ọjà

Ẹ̀yà	Ọdún / ẹ́ńjìnì	Drive / body / steering	Àwọn pàtàkì ìtọ́kasí	Ìyàtọ̀ ọjà àti ìṣàyẹ̀wò	Ipò / orísun
Front bumper cover body · Front	2019-2025 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	US/Canada, Japan, GCC and other-market bumper covers can differ in grille, reflector, fog-lamp, DRL and radar openings. Pre-facelift and facelift parts must be separated even within one chassis code. Ìṣàyẹ̀wò: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Ìwúlò àgbépọ̀: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check A ti pèsè ààyè fọ́tò
A/C compressor assembly climate · Engine-mounted	2019-2025 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Petrol, diesel and hybrid systems can use different compressor brackets, control methods and hose layouts. GCC, African-import, North American and Japanese-market climate packages may differ; country alone is not a fitment key. Ìṣàyẹ̀wò: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Ìwúlò àgbépọ̀: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check A ti pèsè ààyè fọ́tò
Radiator and cooling module cooling · Front	2019-2025 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: CVT, 6AT, 6MT	Drive: 2WD Body: sedan Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Petrol, hybrid and diesel systems use different cooling layouts; do not merge them. Automatic/CVT oil-cooler fittings and fan control can differ by market and trim. Ìṣàyẹ̀wò: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Ìwúlò àgbépọ̀: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label A ti pèsè ààyè fọ́tò
Alternator assembly electrical · Engine-mounted	2019-2025 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	The same model can use different alternators for petrol/diesel engines, engine displacement, stop-start, market emissions equipment and audio loads. Hybrid vehicles may use a different charging architecture and must not be treated as a conventional alternator match. Ìṣàyẹ̀wò: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Ìwúlò àgbépọ̀: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record A ti pèsè ààyè fọ́tò
Front headlamp assembly lighting · LH/RH	2019-2025 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: sedan Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	E140/E150, E170 and E210 lamps are not interchangeable by model name alone. NG/GH vehicles can include RHD imports and LHD North American imports; headlamp beam pattern and connector may differ. Sedan, hatchback/wagon, facelift and LED/halogen assemblies require separate confirmation. Ìṣàyẹ̀wò: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Ìwúlò àgbépọ̀: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison A ti pèsè ààyè fọ́tò

Béèrè nípa ọkọ̀ tàbí ẹ̀yà

Toyota Highlander XU402007-20130 ìtọ́kasí ẹ́ńjìnì · 5 ìtọ́kasí ẹ̀yà

Ọjà: NG, GHÀwọn orúkọ tí a ń lò: Highlander 2008, Highlander 2010, Highlander 2012Orísun ọjà · Orísun ọjà

Àlàyé ìtọ́kasí ẹ́ńjìnì

Àwọn pàtàkì yìí jẹ́ fún ìdánimọ̀. Ba ọjà, trim, kóòdù ẹ́ńjìnì àti VIN mu kí o tó paṣẹ.

Kò sí àlàyé ẹ́ńjìnì fún ìran yìí.

Àwọn pàtàkì ẹ̀yà àti ìyàtọ̀ ọjà

Ẹ̀yà	Ọdún / ẹ́ńjìnì	Drive / body / steering	Àwọn pàtàkì ìtọ́kasí	Ìyàtọ̀ ọjà àti ìṣàyẹ̀wò	Ipò / orísun
Front bumper cover body · Front	2007-2013 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	Bumper shape and brackets may vary with 2WD/4WD, grade, diesel/petrol, tow package, fog lamps and parking sensors. RHD/LHD and local safety equipment can change the lamp and radar interfaces. Ìṣàyẹ̀wò: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Ìwúlò àgbépọ̀: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check A ti pèsè ààyè fọ́tò
A/C compressor assembly climate · Engine-mounted	2007-2013 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Petrol, diesel and hybrid systems can use different compressor brackets, control methods and hose layouts. GCC, African-import, North American and Japanese-market climate packages may differ; country alone is not a fitment key. Ìṣàyẹ̀wò: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Ìwúlò àgbépọ̀: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check A ti pèsè ààyè fọ́tò
Radiator and cooling module cooling · Front	2007-2013 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: 6AT, 8AT	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Petrol, hybrid and diesel systems use different cooling layouts; do not merge them. Automatic/CVT oil-cooler fittings and fan control can differ by market and trim. Ìṣàyẹ̀wò: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Ìwúlò àgbépọ̀: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label A ti pèsè ààyè fọ́tò
Alternator assembly electrical · Engine-mounted	2007-2013 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	The same model can use different alternators for petrol/diesel engines, engine displacement, stop-start, market emissions equipment and audio loads. Hybrid vehicles may use a different charging architecture and must not be treated as a conventional alternator match. Ìṣàyẹ̀wò: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Ìwúlò àgbépọ̀: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record A ti pèsè ààyè fọ́tò
Front headlamp assembly lighting · LH/RH	2007-2013 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	North American, Japanese and other-market lamps may differ in beam pattern, DRL, leveling motor, side marker and connector. Facelift and pre-facelift housings must not be mixed without comparing mounting points and OE suffix. Ìṣàyẹ̀wò: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Ìwúlò àgbépọ̀: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison A ti pèsè ààyè fọ́tò

Béèrè nípa ọkọ̀ tàbí ẹ̀yà

Toyota Highlander XU502013-20192 ìtọ́kasí ẹ́ńjìnì · 5 ìtọ́kasí ẹ̀yà

Ọjà: NG, GHÀwọn orúkọ tí a ń lò: Highlander 2014, Highlander 2015, Highlander 2018Orísun ọjà · Orísun ọjà

Àlàyé ìtọ́kasí ẹ́ńjìnì

Àwọn pàtàkì yìí jẹ́ fún ìdánimọ̀. Ba ọjà, trim, kóòdù ẹ́ńjìnì àti VIN mu kí o tó paṣẹ.

Ẹ́ńjìnì	Iwọn ẹ́ńjìnì	Fuel / induction	Agbara ìtọ́kasí	Gearbox / orísun	Orísun / fọ́tò
1AR-FE 2.7L 4-cylinder	2.7 L 4 cylinder	Gasoline Naturally aspirated	187 hp · 252 Nm	6-speed automatic	A ti pèsè ààyè fọ́tò Toyota 2015 Highlander Product Information Ìtọ́kasí · a ti pèsè ààyè fọ́tò
2GR-FE 3.5L V6	3.5 L 6 cylinder	Gasoline Naturally aspirated	270 hp · 336 Nm	6-speed automatic	A ti pèsè ààyè fọ́tò Toyota 2015 Highlander Product Information Ìtọ́kasí · a ti pèsè ààyè fọ́tò

Àwọn pàtàkì ẹ̀yà àti ìyàtọ̀ ọjà

Ẹ̀yà	Ọdún / ẹ́ńjìnì	Drive / body / steering	Àwọn pàtàkì ìtọ́kasí	Ìyàtọ̀ ọjà àti ìṣàyẹ̀wò	Ipò / orísun
Front bumper cover body · Front	2013-2019 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	Bumper shape and brackets may vary with 2WD/4WD, grade, diesel/petrol, tow package, fog lamps and parking sensors. RHD/LHD and local safety equipment can change the lamp and radar interfaces. Ìṣàyẹ̀wò: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Ìwúlò àgbépọ̀: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check A ti pèsè ààyè fọ́tò
A/C compressor assembly climate · Engine-mounted	2013-2019 Àwọn ẹ́ńjìnì: 1AR-FE, 2GR-FE Gearbox: A kò pèsè	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Petrol, diesel and hybrid systems can use different compressor brackets, control methods and hose layouts. GCC, African-import, North American and Japanese-market climate packages may differ; country alone is not a fitment key. Ìṣàyẹ̀wò: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Ìwúlò àgbépọ̀: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check A ti pèsè ààyè fọ́tò
Radiator and cooling module cooling · Front	2013-2019 Àwọn ẹ́ńjìnì: 1AR-FE, 2GR-FE Gearbox: 6AT, 8AT	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Petrol, hybrid and diesel systems use different cooling layouts; do not merge them. Automatic/CVT oil-cooler fittings and fan control can differ by market and trim. Ìṣàyẹ̀wò: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Ìwúlò àgbépọ̀: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label A ti pèsè ààyè fọ́tò
Alternator assembly electrical · Engine-mounted	2013-2019 Àwọn ẹ́ńjìnì: 1AR-FE, 2GR-FE Gearbox: A kò pèsè	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	The same model can use different alternators for petrol/diesel engines, engine displacement, stop-start, market emissions equipment and audio loads. Hybrid vehicles may use a different charging architecture and must not be treated as a conventional alternator match. Ìṣàyẹ̀wò: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Ìwúlò àgbépọ̀: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record A ti pèsè ààyè fọ́tò
Front headlamp assembly lighting · LH/RH	2013-2019 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	North American, Japanese and other-market lamps may differ in beam pattern, DRL, leveling motor, side marker and connector. Facelift and pre-facelift housings must not be mixed without comparing mounting points and OE suffix. Ìṣàyẹ̀wò: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Ìwúlò àgbépọ̀: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison A ti pèsè ààyè fọ́tò

Béèrè nípa ọkọ̀ tàbí ẹ̀yà

Toyota Hilux AN10/AN20/AN302005-20150 ìtọ́kasí ẹ́ńjìnì · 5 ìtọ́kasí ẹ̀yà

Ọjà: NG, GHÀwọn orúkọ tí a ń lò: Hilux 2008, Hilux 2010, Hilux 2014Orísun ọjà · Orísun ọjà

Àlàyé ìtọ́kasí ẹ́ńjìnì

Àwọn pàtàkì yìí jẹ́ fún ìdánimọ̀. Ba ọjà, trim, kóòdù ẹ́ńjìnì àti VIN mu kí o tó paṣẹ.

Kò sí àlàyé ẹ́ńjìnì fún ìran yìí.

Àwọn pàtàkì ẹ̀yà àti ìyàtọ̀ ọjà

Ẹ̀yà	Ọdún / ẹ́ńjìnì	Drive / body / steering	Àwọn pàtàkì ìtọ́kasí	Ìyàtọ̀ ọjà àti ìṣàyẹ̀wò	Ipò / orísun
Front bumper cover body · Front	2005-2015 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD, 4WD Body: pickup Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	Bumper shape and brackets may vary with 2WD/4WD, grade, diesel/petrol, tow package, fog lamps and parking sensors. RHD/LHD and local safety equipment can change the lamp and radar interfaces. Ìṣàyẹ̀wò: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Ìwúlò àgbépọ̀: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check A ti pèsè ààyè fọ́tò
A/C compressor assembly climate · Engine-mounted	2005-2015 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD, 4WD Body: pickup Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Petrol, diesel and hybrid systems can use different compressor brackets, control methods and hose layouts. GCC, African-import, North American and Japanese-market climate packages may differ; country alone is not a fitment key. Ìṣàyẹ̀wò: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Ìwúlò àgbépọ̀: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check A ti pèsè ààyè fọ́tò
Radiator and cooling module cooling · Front	2005-2015 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: 6AT, 6MT	Drive: 2WD, 4WD Body: pickup Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Diesel turbo, petrol and high-temperature/towing packages may use different core, fan, oil-cooler and hose arrangements. RHD/LHD generally does not identify the radiator by itself; engine, transmission and donor label are decisive. Ìṣàyẹ̀wò: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Ìwúlò àgbépọ̀: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label A ti pèsè ààyè fọ́tò
Alternator assembly electrical · Engine-mounted	2005-2015 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD, 4WD Body: pickup Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	The same model can use different alternators for petrol/diesel engines, engine displacement, stop-start, market emissions equipment and audio loads. Hybrid vehicles may use a different charging architecture and must not be treated as a conventional alternator match. Ìṣàyẹ̀wò: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Ìwúlò àgbépọ̀: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record A ti pèsè ààyè fọ́tò
Front headlamp assembly lighting · LH/RH	2005-2015 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD, 4WD Body: pickup, SUV Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	RHD and LHD beam pattern, diesel/petrol trim, grille and bumper interfaces may differ by market. LED, HID and halogen versions are separate assemblies even when the chassis generation matches. Ìṣàyẹ̀wò: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Ìwúlò àgbépọ̀: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison A ti pèsè ààyè fọ́tò

Béèrè nípa ọkọ̀ tàbí ẹ̀yà

Toyota Hilux AN120/AN1302015-20231 ìtọ́kasí ẹ́ńjìnì · 5 ìtọ́kasí ẹ̀yà

Ọjà: NG, GHÀwọn orúkọ tí a ń lò: Hilux 2016, Hilux 2019, Hilux 2022Orísun ọjà · Orísun ọjà

Àlàyé ìtọ́kasí ẹ́ńjìnì

Àwọn pàtàkì yìí jẹ́ fún ìdánimọ̀. Ba ọjà, trim, kóòdù ẹ́ńjìnì àti VIN mu kí o tó paṣẹ.

Ẹ́ńjìnì	Iwọn ẹ́ńjìnì	Fuel / induction	Agbara ìtọ́kasí	Gearbox / orísun	Orísun / fọ́tò
1GD-FTV 2.8L direct-injection turbo diesel 4-cylinder	2.754 L 4 cylinder	Diesel Turbocharged	177 hp · 450 Nm	6-speed automatic	A ti pèsè ààyè fọ́tò Toyota 1GD-FTV official global engine specifications Ìtọ́kasí · a ti pèsè ààyè fọ́tò

Àwọn pàtàkì ẹ̀yà àti ìyàtọ̀ ọjà

Ẹ̀yà	Ọdún / ẹ́ńjìnì	Drive / body / steering	Àwọn pàtàkì ìtọ́kasí	Ìyàtọ̀ ọjà àti ìṣàyẹ̀wò	Ipò / orísun
Front bumper cover body · Front	2015-2023 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD, 4WD Body: pickup Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	Bumper shape and brackets may vary with 2WD/4WD, grade, diesel/petrol, tow package, fog lamps and parking sensors. RHD/LHD and local safety equipment can change the lamp and radar interfaces. Ìṣàyẹ̀wò: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Ìwúlò àgbépọ̀: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check A ti pèsè ààyè fọ́tò
A/C compressor assembly climate · Engine-mounted	2015-2023 Àwọn ẹ́ńjìnì: 1GD-FTV Gearbox: A kò pèsè	Drive: 2WD, 4WD Body: pickup Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Petrol, diesel and hybrid systems can use different compressor brackets, control methods and hose layouts. GCC, African-import, North American and Japanese-market climate packages may differ; country alone is not a fitment key. Ìṣàyẹ̀wò: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Ìwúlò àgbépọ̀: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check A ti pèsè ààyè fọ́tò
Radiator and cooling module cooling · Front	2015-2023 Àwọn ẹ́ńjìnì: 1GD-FTV Gearbox: 6AT, 6MT	Drive: 2WD, 4WD Body: pickup Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Diesel turbo, petrol and high-temperature/towing packages may use different core, fan, oil-cooler and hose arrangements. RHD/LHD generally does not identify the radiator by itself; engine, transmission and donor label are decisive. Ìṣàyẹ̀wò: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Ìwúlò àgbépọ̀: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label A ti pèsè ààyè fọ́tò
Alternator assembly electrical · Engine-mounted	2015-2023 Àwọn ẹ́ńjìnì: 1GD-FTV Gearbox: A kò pèsè	Drive: 2WD, 4WD Body: pickup Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	The same model can use different alternators for petrol/diesel engines, engine displacement, stop-start, market emissions equipment and audio loads. Hybrid vehicles may use a different charging architecture and must not be treated as a conventional alternator match. Ìṣàyẹ̀wò: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Ìwúlò àgbépọ̀: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record A ti pèsè ààyè fọ́tò
Front headlamp assembly lighting · LH/RH	2015-2023 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD, 4WD Body: pickup, SUV Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	RHD and LHD beam pattern, diesel/petrol trim, grille and bumper interfaces may differ by market. LED, HID and halogen versions are separate assemblies even when the chassis generation matches. Ìṣàyẹ̀wò: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Ìwúlò àgbépọ̀: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison A ti pèsè ààyè fọ́tò

Béèrè nípa ọkọ̀ tàbí ẹ̀yà

Toyota Land Cruiser J2002007-20211 ìtọ́kasí ẹ́ńjìnì · 5 ìtọ́kasí ẹ̀yà

Ọjà: NG, GHÀwọn orúkọ tí a ń lò: Land Cruiser 200, LC200, Land Cruiser V8Orísun ọjà · Orísun ọjà

Àlàyé ìtọ́kasí ẹ́ńjìnì

Àwọn pàtàkì yìí jẹ́ fún ìdánimọ̀. Ba ọjà, trim, kóòdù ẹ́ńjìnì àti VIN mu kí o tó paṣẹ.

Ẹ́ńjìnì	Iwọn ẹ́ńjìnì	Fuel / induction	Agbara ìtọ́kasí	Gearbox / orísun	Orísun / fọ́tò
1VD-FTV 4.5L V8 common-rail twin-turbo diesel	4.461 L 8 cylinder	Diesel Twin-turbocharged	286 hp · 650 Nm	6-speed automatic	A ti pèsè ààyè fọ́tò Toyota Land Cruiser 200 official technical specifications Ìtọ́kasí · a ti pèsè ààyè fọ́tò

Àwọn pàtàkì ẹ̀yà àti ìyàtọ̀ ọjà

Ẹ̀yà	Ọdún / ẹ́ńjìnì	Drive / body / steering	Àwọn pàtàkì ìtọ́kasí	Ìyàtọ̀ ọjà àti ìṣàyẹ̀wò	Ipò / orísun
Front bumper cover body · Front	2007-2021 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	Bumper shape and brackets may vary with 2WD/4WD, grade, diesel/petrol, tow package, fog lamps and parking sensors. RHD/LHD and local safety equipment can change the lamp and radar interfaces. Ìṣàyẹ̀wò: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Ìwúlò àgbépọ̀: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check A ti pèsè ààyè fọ́tò
A/C compressor assembly climate · Engine-mounted	2007-2021 Àwọn ẹ́ńjìnì: 1VD-FTV Gearbox: A kò pèsè	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Petrol, diesel and hybrid systems can use different compressor brackets, control methods and hose layouts. GCC, African-import, North American and Japanese-market climate packages may differ; country alone is not a fitment key. Ìṣàyẹ̀wò: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Ìwúlò àgbépọ̀: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check A ti pèsè ààyè fọ́tò
Radiator and cooling module cooling · Front	2007-2021 Àwọn ẹ́ńjìnì: 1VD-FTV Gearbox: 6AT, 8AT	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Diesel turbo, petrol and high-temperature/towing packages may use different core, fan, oil-cooler and hose arrangements. RHD/LHD generally does not identify the radiator by itself; engine, transmission and donor label are decisive. Ìṣàyẹ̀wò: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Ìwúlò àgbépọ̀: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label A ti pèsè ààyè fọ́tò
Alternator assembly electrical · Engine-mounted	2007-2021 Àwọn ẹ́ńjìnì: 1VD-FTV Gearbox: A kò pèsè	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	The same model can use different alternators for petrol/diesel engines, engine displacement, stop-start, market emissions equipment and audio loads. Hybrid vehicles may use a different charging architecture and must not be treated as a conventional alternator match. Ìṣàyẹ̀wò: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Ìwúlò àgbépọ̀: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record A ti pèsè ààyè fọ́tò
Front headlamp assembly lighting · LH/RH	2007-2021 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD, 4WD Body: pickup, SUV Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	RHD and LHD beam pattern, diesel/petrol trim, grille and bumper interfaces may differ by market. LED, HID and halogen versions are separate assemblies even when the chassis generation matches. Ìṣàyẹ̀wò: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Ìwúlò àgbépọ̀: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison A ti pèsè ààyè fọ́tò

Béèrè nípa ọkọ̀ tàbí ẹ̀yà

Toyota Land Cruiser Prado J1502009-20231 ìtọ́kasí ẹ́ńjìnì · 5 ìtọ́kasí ẹ̀yà

Ọjà: NG, GHÀwọn orúkọ tí a ń lò: Prado 2010, Prado 2014, Prado 2018, Land Cruiser PradoOrísun ọjà · Orísun ọjà

Àlàyé ìtọ́kasí ẹ́ńjìnì

Àwọn pàtàkì yìí jẹ́ fún ìdánimọ̀. Ba ọjà, trim, kóòdù ẹ́ńjìnì àti VIN mu kí o tó paṣẹ.

Ẹ́ńjìnì	Iwọn ẹ́ńjìnì	Fuel / induction	Agbara ìtọ́kasí	Gearbox / orísun	Orísun / fọ́tò
1GD-FTV 2.8L direct-injection turbo diesel 4-cylinder	2.754 L 4 cylinder	Diesel Turbocharged	177 hp · 450 Nm	6-speed automatic	A ti pèsè ààyè fọ́tò Toyota Land Cruiser Prado 1GD-FTV official global reference Ìtọ́kasí · a ti pèsè ààyè fọ́tò

Àwọn pàtàkì ẹ̀yà àti ìyàtọ̀ ọjà

Ẹ̀yà	Ọdún / ẹ́ńjìnì	Drive / body / steering	Àwọn pàtàkì ìtọ́kasí	Ìyàtọ̀ ọjà àti ìṣàyẹ̀wò	Ipò / orísun
Front bumper cover body · Front	2009-2023 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	Bumper shape and brackets may vary with 2WD/4WD, grade, diesel/petrol, tow package, fog lamps and parking sensors. RHD/LHD and local safety equipment can change the lamp and radar interfaces. Ìṣàyẹ̀wò: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Ìwúlò àgbépọ̀: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check A ti pèsè ààyè fọ́tò
A/C compressor assembly climate · Engine-mounted	2009-2023 Àwọn ẹ́ńjìnì: 1GD-FTV Gearbox: A kò pèsè	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Petrol, diesel and hybrid systems can use different compressor brackets, control methods and hose layouts. GCC, African-import, North American and Japanese-market climate packages may differ; country alone is not a fitment key. Ìṣàyẹ̀wò: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Ìwúlò àgbépọ̀: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check A ti pèsè ààyè fọ́tò
Radiator and cooling module cooling · Front	2009-2023 Àwọn ẹ́ńjìnì: 1GD-FTV Gearbox: 6AT, 8AT	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Diesel turbo, petrol and high-temperature/towing packages may use different core, fan, oil-cooler and hose arrangements. RHD/LHD generally does not identify the radiator by itself; engine, transmission and donor label are decisive. Ìṣàyẹ̀wò: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Ìwúlò àgbépọ̀: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label A ti pèsè ààyè fọ́tò
Alternator assembly electrical · Engine-mounted	2009-2023 Àwọn ẹ́ńjìnì: 1GD-FTV Gearbox: A kò pèsè	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	The same model can use different alternators for petrol/diesel engines, engine displacement, stop-start, market emissions equipment and audio loads. Hybrid vehicles may use a different charging architecture and must not be treated as a conventional alternator match. Ìṣàyẹ̀wò: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Ìwúlò àgbépọ̀: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record A ti pèsè ààyè fọ́tò
Front headlamp assembly lighting · LH/RH	2009-2023 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD, 4WD Body: pickup, SUV Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	RHD and LHD beam pattern, diesel/petrol trim, grille and bumper interfaces may differ by market. LED, HID and halogen versions are separate assemblies even when the chassis generation matches. Ìṣàyẹ̀wò: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Ìwúlò àgbépọ̀: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison A ti pèsè ààyè fọ́tò

Béèrè nípa ọkọ̀ tàbí ẹ̀yà

Toyota RAV4 XA302005-20120 ìtọ́kasí ẹ́ńjìnì · 5 ìtọ́kasí ẹ̀yà

Ọjà: NG, GHÀwọn orúkọ tí a ń lò: RAV4 2007, RAV4 2010, RAV4 2012Orísun ọjà · Orísun ọjà

Àlàyé ìtọ́kasí ẹ́ńjìnì

Àwọn pàtàkì yìí jẹ́ fún ìdánimọ̀. Ba ọjà, trim, kóòdù ẹ́ńjìnì àti VIN mu kí o tó paṣẹ.

Kò sí àlàyé ẹ́ńjìnì fún ìran yìí.

Àwọn pàtàkì ẹ̀yà àti ìyàtọ̀ ọjà

Ẹ̀yà	Ọdún / ẹ́ńjìnì	Drive / body / steering	Àwọn pàtàkì ìtọ́kasí	Ìyàtọ̀ ọjà àti ìṣàyẹ̀wò	Ipò / orísun
Front bumper cover body · Front	2005-2012 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	Bumper shape and brackets may vary with 2WD/4WD, grade, diesel/petrol, tow package, fog lamps and parking sensors. RHD/LHD and local safety equipment can change the lamp and radar interfaces. Ìṣàyẹ̀wò: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Ìwúlò àgbépọ̀: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check A ti pèsè ààyè fọ́tò
A/C compressor assembly climate · Engine-mounted	2005-2012 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Petrol, diesel and hybrid systems can use different compressor brackets, control methods and hose layouts. GCC, African-import, North American and Japanese-market climate packages may differ; country alone is not a fitment key. Ìṣàyẹ̀wò: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Ìwúlò àgbépọ̀: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check A ti pèsè ààyè fọ́tò
Radiator and cooling module cooling · Front	2005-2012 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: CVT, 6AT, 6MT	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Petrol, hybrid and diesel systems use different cooling layouts; do not merge them. Automatic/CVT oil-cooler fittings and fan control can differ by market and trim. Ìṣàyẹ̀wò: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Ìwúlò àgbépọ̀: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label A ti pèsè ààyè fọ́tò
Alternator assembly electrical · Engine-mounted	2005-2012 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	The same model can use different alternators for petrol/diesel engines, engine displacement, stop-start, market emissions equipment and audio loads. Hybrid vehicles may use a different charging architecture and must not be treated as a conventional alternator match. Ìṣàyẹ̀wò: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Ìwúlò àgbépọ̀: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record A ti pèsè ààyè fọ́tò
Front headlamp assembly lighting · LH/RH	2005-2012 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	North American, Japanese and other-market lamps may differ in beam pattern, DRL, leveling motor, side marker and connector. Facelift and pre-facelift housings must not be mixed without comparing mounting points and OE suffix. Ìṣàyẹ̀wò: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Ìwúlò àgbépọ̀: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison A ti pèsè ààyè fọ́tò

Béèrè nípa ọkọ̀ tàbí ẹ̀yà

Toyota RAV4 XA402012-20181 ìtọ́kasí ẹ́ńjìnì · 5 ìtọ́kasí ẹ̀yà

Ọjà: NG, GHÀwọn orúkọ tí a ń lò: RAV4 2013, RAV4 2015, RAV4 2017Orísun ọjà · Orísun ọjà

Àlàyé ìtọ́kasí ẹ́ńjìnì

Àwọn pàtàkì yìí jẹ́ fún ìdánimọ̀. Ba ọjà, trim, kóòdù ẹ́ńjìnì àti VIN mu kí o tó paṣẹ.

Ẹ́ńjìnì	Iwọn ẹ́ńjìnì	Fuel / induction	Agbara ìtọ́kasí	Gearbox / orísun	Orísun / fọ́tò
2AR-FE 2.5L direct-injection 4-cylinder	2.5 L 4 cylinder	Gasoline Naturally aspirated	176 hp · 233 Nm	6-speed automatic	A ti pèsè ààyè fọ́tò 2015 Toyota RAV4 Product Information Ìtọ́kasí · a ti pèsè ààyè fọ́tò

Àwọn pàtàkì ẹ̀yà àti ìyàtọ̀ ọjà

Ẹ̀yà	Ọdún / ẹ́ńjìnì	Drive / body / steering	Àwọn pàtàkì ìtọ́kasí	Ìyàtọ̀ ọjà àti ìṣàyẹ̀wò	Ipò / orísun
Front bumper cover body · Front	2012-2018 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	Bumper shape and brackets may vary with 2WD/4WD, grade, diesel/petrol, tow package, fog lamps and parking sensors. RHD/LHD and local safety equipment can change the lamp and radar interfaces. Ìṣàyẹ̀wò: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Ìwúlò àgbépọ̀: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check A ti pèsè ààyè fọ́tò
A/C compressor assembly climate · Engine-mounted	2012-2018 Àwọn ẹ́ńjìnì: 2AR-FE Gearbox: A kò pèsè	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Petrol, diesel and hybrid systems can use different compressor brackets, control methods and hose layouts. GCC, African-import, North American and Japanese-market climate packages may differ; country alone is not a fitment key. Ìṣàyẹ̀wò: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Ìwúlò àgbépọ̀: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check A ti pèsè ààyè fọ́tò
Radiator and cooling module cooling · Front	2012-2018 Àwọn ẹ́ńjìnì: 2AR-FE Gearbox: CVT, 6AT, 6MT	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Petrol, hybrid and diesel systems use different cooling layouts; do not merge them. Automatic/CVT oil-cooler fittings and fan control can differ by market and trim. Ìṣàyẹ̀wò: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Ìwúlò àgbépọ̀: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label A ti pèsè ààyè fọ́tò
Alternator assembly electrical · Engine-mounted	2012-2018 Àwọn ẹ́ńjìnì: 2AR-FE Gearbox: A kò pèsè	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	The same model can use different alternators for petrol/diesel engines, engine displacement, stop-start, market emissions equipment and audio loads. Hybrid vehicles may use a different charging architecture and must not be treated as a conventional alternator match. Ìṣàyẹ̀wò: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Ìwúlò àgbépọ̀: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record A ti pèsè ààyè fọ́tò
Front headlamp assembly lighting · LH/RH	2012-2018 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	North American, Japanese and other-market lamps may differ in beam pattern, DRL, leveling motor, side marker and connector. Facelift and pre-facelift housings must not be mixed without comparing mounting points and OE suffix. Ìṣàyẹ̀wò: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Ìwúlò àgbépọ̀: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison A ti pèsè ààyè fọ́tò

Béèrè nípa ọkọ̀ tàbí ẹ̀yà

Toyota RAV4 XA502018-20250 ìtọ́kasí ẹ́ńjìnì · 5 ìtọ́kasí ẹ̀yà

Ọjà: NG, GHÀwọn orúkọ tí a ń lò: RAV4 2019, RAV4 2021, RAV4 2024Orísun ọjà · Orísun ọjà

Àlàyé ìtọ́kasí ẹ́ńjìnì

Àwọn pàtàkì yìí jẹ́ fún ìdánimọ̀. Ba ọjà, trim, kóòdù ẹ́ńjìnì àti VIN mu kí o tó paṣẹ.

Kò sí àlàyé ẹ́ńjìnì fún ìran yìí.

Àwọn pàtàkì ẹ̀yà àti ìyàtọ̀ ọjà

Ẹ̀yà	Ọdún / ẹ́ńjìnì	Drive / body / steering	Àwọn pàtàkì ìtọ́kasí	Ìyàtọ̀ ọjà àti ìṣàyẹ̀wò	Ipò / orísun
Front bumper cover body · Front	2018-2025 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	Bumper shape and brackets may vary with 2WD/4WD, grade, diesel/petrol, tow package, fog lamps and parking sensors. RHD/LHD and local safety equipment can change the lamp and radar interfaces. Ìṣàyẹ̀wò: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Ìwúlò àgbépọ̀: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check A ti pèsè ààyè fọ́tò
A/C compressor assembly climate · Engine-mounted	2018-2025 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Petrol, diesel and hybrid systems can use different compressor brackets, control methods and hose layouts. GCC, African-import, North American and Japanese-market climate packages may differ; country alone is not a fitment key. Ìṣàyẹ̀wò: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Ìwúlò àgbépọ̀: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check A ti pèsè ààyè fọ́tò
Radiator and cooling module cooling · Front	2018-2025 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: CVT, 6AT, 6MT	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Petrol, hybrid and diesel systems use different cooling layouts; do not merge them. Automatic/CVT oil-cooler fittings and fan control can differ by market and trim. Ìṣàyẹ̀wò: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Ìwúlò àgbépọ̀: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label A ti pèsè ààyè fọ́tò
Alternator assembly electrical · Engine-mounted	2018-2025 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	The same model can use different alternators for petrol/diesel engines, engine displacement, stop-start, market emissions equipment and audio loads. Hybrid vehicles may use a different charging architecture and must not be treated as a conventional alternator match. Ìṣàyẹ̀wò: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Ìwúlò àgbépọ̀: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record A ti pèsè ààyè fọ́tò
Front headlamp assembly lighting · LH/RH	2018-2025 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	North American, Japanese and other-market lamps may differ in beam pattern, DRL, leveling motor, side marker and connector. Facelift and pre-facelift housings must not be mixed without comparing mounting points and OE suffix. Ìṣàyẹ̀wò: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Ìwúlò àgbépọ̀: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison A ti pèsè ààyè fọ́tò

Béèrè nípa ọkọ̀ tàbí ẹ̀yà

Toyota Vitz/Yaris XP1302010-20200 ìtọ́kasí ẹ́ńjìnì · 5 ìtọ́kasí ẹ̀yà

Ọjà: NG, GHÀwọn orúkọ tí a ń lò: Toyota Vitz, Toyota Yaris, Yaris 2012, Vitz 2015Orísun ọjà · Orísun ọjà

Àlàyé ìtọ́kasí ẹ́ńjìnì

Àwọn pàtàkì yìí jẹ́ fún ìdánimọ̀. Ba ọjà, trim, kóòdù ẹ́ńjìnì àti VIN mu kí o tó paṣẹ.

Kò sí àlàyé ẹ́ńjìnì fún ìran yìí.

Àwọn pàtàkì ẹ̀yà àti ìyàtọ̀ ọjà

Ẹ̀yà	Ọdún / ẹ́ńjìnì	Drive / body / steering	Àwọn pàtàkì ìtọ́kasí	Ìyàtọ̀ ọjà àti ìṣàyẹ̀wò	Ipò / orísun
Front bumper cover body · Front	2010-2020 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: hatchback Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	Market, body style, trim, facelift, sensor equipment and steering side must be confirmed before interchange. Ìṣàyẹ̀wò: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Ìwúlò àgbépọ̀: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check A ti pèsè ààyè fọ́tò
A/C compressor assembly climate · Engine-mounted	2010-2020 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: hatchback Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Petrol, diesel and hybrid systems can use different compressor brackets, control methods and hose layouts. GCC, African-import, North American and Japanese-market climate packages may differ; country alone is not a fitment key. Ìṣàyẹ̀wò: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Ìwúlò àgbépọ̀: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check A ti pèsè ààyè fọ́tò
Radiator and cooling module cooling · Front	2010-2020 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: CVT, 6AT, 6MT	Drive: 2WD Body: hatchback Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Engine, transmission, drivetrain, climate package and market equipment must be confirmed from the donor vehicle. Ìṣàyẹ̀wò: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Ìwúlò àgbépọ̀: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label A ti pèsè ààyè fọ́tò
Alternator assembly electrical · Engine-mounted	2010-2020 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: hatchback Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	The same model can use different alternators for petrol/diesel engines, engine displacement, stop-start, market emissions equipment and audio loads. Hybrid vehicles may use a different charging architecture and must not be treated as a conventional alternator match. Ìṣàyẹ̀wò: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Ìwúlò àgbépọ̀: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record A ti pèsè ààyè fọ́tò
Front headlamp assembly lighting · LH/RH	2010-2020 Àwọn ẹ́ńjìnì: A kò pèsè Gearbox: A kò pèsè	Drive: 2WD Body: hatchback Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	Market, body style, trim, facelift, steering side and lamp technology must be confirmed from the donor unit. Ìṣàyẹ̀wò: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Ìwúlò àgbépọ̀: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Ìtọ́kasí nìkan — ṣàyẹ̀wò kí o tó sọ owó Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison A ti pèsè ààyè fọ́tò

Béèrè nípa ọkọ̀ tàbí ẹ̀yà

Honda Pilot 3rd generation2016-20221 ìtọ́kasí ẹ́ńjìnì · 0 ìtọ́kasí ẹ̀yà

Ọjà: NG, GHÀwọn orúkọ tí a ń lò: Pilot 2017, Pilot 2019, Pilot 2021Orísun ọjà · Orísun ọjà

Àlàyé ìtọ́kasí ẹ́ńjìnì

Àwọn pàtàkì yìí jẹ́ fún ìdánimọ̀. Ba ọjà, trim, kóòdù ẹ́ńjìnì àti VIN mu kí o tó paṣẹ.

Ẹ́ńjìnì	Iwọn ẹ́ńjìnì	Fuel / induction	Agbara ìtọ́kasí	Gearbox / orísun	Orísun / fọ́tò
J35Y6 3.5L direct-injection V6	3.5 L 6 cylinder	Gasoline Naturally aspirated	280 hp · 355 Nm	6-speed or 9-speed automatic	A ti pèsè ààyè fọ́tò 2019 Honda Pilot official brochure Ìtọ́kasí · a ti pèsè ààyè fọ́tò

Àwọn pàtàkì ẹ̀yà àti ìyàtọ̀ ọjà

Kò sí àlàyé ẹ̀yà fún ìran yìí.

Béèrè nípa ọkọ̀ tàbí ẹ̀yà

Nissan Navara D232015-20231 ìtọ́kasí ẹ́ńjìnì · 0 ìtọ́kasí ẹ̀yà

Ọjà: NG, GHÀwọn orúkọ tí a ń lò: Navara 2016, Navara 2019, Navara 2022Orísun ọjà

Àlàyé ìtọ́kasí ẹ́ńjìnì

Àwọn pàtàkì yìí jẹ́ fún ìdánimọ̀. Ba ọjà, trim, kóòdù ẹ́ńjìnì àti VIN mu kí o tó paṣẹ.

Ẹ́ńjìnì	Iwọn ẹ́ńjìnì	Fuel / induction	Agbara ìtọ́kasí	Gearbox / orísun	Orísun / fọ́tò
YD25DDTi 2.5L common-rail turbo diesel 4-cylinder	2.5 L 4 cylinder	Diesel Turbocharged	A kò pèsè	6-speed manual or 7-speed automatic, market-dependent	A ti pèsè ààyè fọ́tò Nissan Global YD25DDTi engine technology reference Ìtọ́kasí · a ti pèsè ààyè fọ́tò

Àwọn pàtàkì ẹ̀yà àti ìyàtọ̀ ọjà

Kò sí àlàyé ẹ̀yà fún ìran yìí.

Béèrè nípa ọkọ̀ tàbí ẹ̀yà

Nissan Patrol Y622010-20241 ìtọ́kasí ẹ́ńjìnì · 0 ìtọ́kasí ẹ̀yà

Ọjà: NG, GHÀwọn orúkọ tí a ń lò: Patrol 2012, Patrol 2015, Patrol 2020Orísun ọjà · Orísun ọjà

Àlàyé ìtọ́kasí ẹ́ńjìnì

Àwọn pàtàkì yìí jẹ́ fún ìdánimọ̀. Ba ọjà, trim, kóòdù ẹ́ńjìnì àti VIN mu kí o tó paṣẹ.

Ẹ́ńjìnì	Iwọn ẹ́ńjìnì	Fuel / induction	Agbara ìtọ́kasí	Gearbox / orísun	Orísun / fọ́tò
VK56VD 5.6L V8 direct-injection gasoline engine	5.552 L 8 cylinder	Gasoline Naturally aspirated	400 hp · 560 Nm	7-speed automatic	A ti pèsè ààyè fọ́tò Nissan Patrol official brochure Ìtọ́kasí · a ti pèsè ààyè fọ́tò

Àwọn pàtàkì ẹ̀yà àti ìyàtọ̀ ọjà

Kò sí àlàyé ẹ̀yà fún ìran yìí.

Béèrè nípa ọkọ̀ tàbí ẹ̀yà

Nissan X-Trail T312007-20131 ìtọ́kasí ẹ́ńjìnì · 0 ìtọ́kasí ẹ̀yà

Ọjà: NG, GHÀwọn orúkọ tí a ń lò: X-Trail 2008, X-Trail 2010, X-Trail 2012Orísun ọjà · Orísun ọjà

Àlàyé ìtọ́kasí ẹ́ńjìnì

Àwọn pàtàkì yìí jẹ́ fún ìdánimọ̀. Ba ọjà, trim, kóòdù ẹ́ńjìnì àti VIN mu kí o tó paṣẹ.

Ẹ́ńjìnì	Iwọn ẹ́ńjìnì	Fuel / induction	Agbara ìtọ́kasí	Gearbox / orísun	Orísun / fọ́tò
MR20DE 2.0L DOHC 4-cylinder	2 L 4 cylinder	Gasoline Naturally aspirated	A kò pèsè	CVT or 6-speed manual, market-dependent	A ti pèsè ààyè fọ́tò Nissan Global MR20DE engine technology reference Ìtọ́kasí · a ti pèsè ààyè fọ́tò

Àwọn pàtàkì ẹ̀yà àti ìyàtọ̀ ọjà

Kò sí àlàyé ẹ̀yà fún ìran yìí.

Béèrè nípa ọkọ̀ tàbí ẹ̀yà