Vehicle · engine · part data

Vehicle and part reference

Review model generations, engine references and market-specific part parameters before sending a sourcing request.

31vehicle generations with reference data

18engine reference rows

135part reference rows

Honda Accord 8th generation2008-20120 engine refs · 5 part refs

Markets: NG, GHCommon names: Accord 2008, Accord 2010, Accord 2012Market source · Market source

Engine reference data

These specifications are reference data for identification. Match the vehicle market, trim, engine label, and VIN before quoting an engine or engine part.

No engine reference has been recorded for this generation yet.

Part parameter and market reference

Reference guidance covers common vehicle and market variants in Nigeria and Ghana. It is not a stock claim and does not replace the donor label, OE number, VIN, connector and physical comparison before quotation.

Part	Years / engine	Drive / body / steering	Reference parameters	Market differences and checks	Status / source
Front bumper cover body · Front	2008-2012 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: sedan Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	North American, Japanese, European and other-market bumpers may differ in side markers, plate recess, fog lamps, radar and pedestrian-safety interfaces. Body style and Sport/standard trim must be confirmed. Checks: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Interchange: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Reference only — confirm before quote Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check Photo slot reserved
A/C compressor assembly climate · Engine-mounted	2008-2012 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: sedan Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Engine family, body style, market climate package and compressor control valve can change the correct assembly. Hybrid/electric compressor systems must be separated from belt-driven units. Checks: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Interchange: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Reference only — confirm before quote Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check Photo slot reserved
Radiator and cooling module cooling · Front	2008-2012 Engines: Not provided Transmission: CVT, 6MT, 9AT, 10AT	Drive: 2WD Body: sedan Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Engine displacement, turbo/non-turbo, CVT/automatic transmission and hybrid equipment can change radiator and fan assemblies. Market emissions and condenser/fan-control packages must be checked separately. Checks: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Interchange: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Reference only — confirm before quote Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label Photo slot reserved
Alternator assembly electrical · Engine-mounted	2008-2012 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: sedan Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	Engine family, trim, stop-start/idle-stop and market charging control can change regulator, plug and rated output. Accord/Civic/CR-V petrol and hybrid systems require separate checks. Checks: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Interchange: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Reference only — confirm before quote Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record Photo slot reserved
Front headlamp assembly lighting · LH/RH	2008-2012 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: sedan Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	US, Japan, EU and other-market lamps can differ in beam pattern, DRL, side marker, AFS and connector. Sedan, coupe, hatchback and SUV body variants require separate verification. Checks: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Interchange: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Reference only — confirm before quote Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison Photo slot reserved

Part	Years / engine	Drive / body / steering	Reference parameters	Market differences and checks	Status / source
Front bumper cover body · Front	2013-2017 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: sedan Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	North American, Japanese, European and other-market bumpers may differ in side markers, plate recess, fog lamps, radar and pedestrian-safety interfaces. Body style and Sport/standard trim must be confirmed. Checks: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Interchange: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Reference only — confirm before quote Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check Photo slot reserved
A/C compressor assembly climate · Engine-mounted	2013-2017 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: sedan Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Engine family, body style, market climate package and compressor control valve can change the correct assembly. Hybrid/electric compressor systems must be separated from belt-driven units. Checks: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Interchange: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Reference only — confirm before quote Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check Photo slot reserved
Radiator and cooling module cooling · Front	2013-2017 Engines: Not provided Transmission: CVT, 6MT, 9AT, 10AT	Drive: 2WD Body: sedan Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Engine displacement, turbo/non-turbo, CVT/automatic transmission and hybrid equipment can change radiator and fan assemblies. Market emissions and condenser/fan-control packages must be checked separately. Checks: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Interchange: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Reference only — confirm before quote Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label Photo slot reserved
Alternator assembly electrical · Engine-mounted	2013-2017 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: sedan Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	Engine family, trim, stop-start/idle-stop and market charging control can change regulator, plug and rated output. Accord/Civic/CR-V petrol and hybrid systems require separate checks. Checks: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Interchange: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Reference only — confirm before quote Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record Photo slot reserved
Front headlamp assembly lighting · LH/RH	2013-2017 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: sedan Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	US, Japan, EU and other-market lamps can differ in beam pattern, DRL, side marker, AFS and connector. Sedan, coupe, hatchback and SUV body variants require separate verification. Checks: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Interchange: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Reference only — confirm before quote Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison Photo slot reserved

Engine	Displacement	Fuel / induction	Output reference	Transmission / source	Source / photo
K20C4 2.0L direct-injection turbo 4-cylinder	2 L 4 cylinders	Gasoline Turbocharged	252 hp · 370 Nm	10-speed automatic	Photo slot reserved 2018 Honda Accord official brochure Reference specification · photo slot reserved
L15BE 1.5L direct-injection turbo 4-cylinder	1.5 L 4 cylinders	Gasoline Turbocharged	192 hp · 260 Nm	CVT	Photo slot reserved 2018 Honda Accord official brochure Reference specification · photo slot reserved

Part	Years / engine	Drive / body / steering	Reference parameters	Market differences and checks	Status / source
Front bumper cover body · Front	2018-2022 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: sedan Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	North American, Japanese, European and other-market bumpers may differ in side markers, plate recess, fog lamps, radar and pedestrian-safety interfaces. Body style and Sport/standard trim must be confirmed. Checks: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Interchange: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Reference only — confirm before quote Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check Photo slot reserved
A/C compressor assembly climate · Engine-mounted	2018-2022 Engines: K20C4, L15BE Transmission: Not provided	Drive: 2WD Body: sedan Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Engine family, body style, market climate package and compressor control valve can change the correct assembly. Hybrid/electric compressor systems must be separated from belt-driven units. Checks: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Interchange: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Reference only — confirm before quote Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check Photo slot reserved
Radiator and cooling module cooling · Front	2018-2022 Engines: K20C4, L15BE Transmission: CVT, 6MT, 9AT, 10AT	Drive: 2WD Body: sedan Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Engine displacement, turbo/non-turbo, CVT/automatic transmission and hybrid equipment can change radiator and fan assemblies. Market emissions and condenser/fan-control packages must be checked separately. Checks: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Interchange: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Reference only — confirm before quote Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label Photo slot reserved
Alternator assembly electrical · Engine-mounted	2018-2022 Engines: K20C4, L15BE Transmission: Not provided	Drive: 2WD Body: sedan Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	Engine family, trim, stop-start/idle-stop and market charging control can change regulator, plug and rated output. Accord/Civic/CR-V petrol and hybrid systems require separate checks. Checks: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Interchange: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Reference only — confirm before quote Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record Photo slot reserved
Front headlamp assembly lighting · LH/RH	2018-2022 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: sedan Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	US, Japan, EU and other-market lamps can differ in beam pattern, DRL, side marker, AFS and connector. Sedan, coupe, hatchback and SUV body variants require separate verification. Checks: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Interchange: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Reference only — confirm before quote Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison Photo slot reserved

Part	Years / engine	Drive / body / steering	Reference parameters	Market differences and checks	Status / source
Front bumper cover body · Front	2007-2011 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: SUV Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	North American, Japanese, European and other-market bumpers may differ in side markers, plate recess, fog lamps, radar and pedestrian-safety interfaces. Body style and Sport/standard trim must be confirmed. Checks: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Interchange: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Reference only — confirm before quote Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check Photo slot reserved
A/C compressor assembly climate · Engine-mounted	2007-2011 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: SUV Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Engine family, body style, market climate package and compressor control valve can change the correct assembly. Hybrid/electric compressor systems must be separated from belt-driven units. Checks: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Interchange: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Reference only — confirm before quote Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check Photo slot reserved
Radiator and cooling module cooling · Front	2007-2011 Engines: Not provided Transmission: CVT, 6MT, 9AT, 10AT	Drive: 2WD Body: SUV Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Engine displacement, turbo/non-turbo, CVT/automatic transmission and hybrid equipment can change radiator and fan assemblies. Market emissions and condenser/fan-control packages must be checked separately. Checks: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Interchange: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Reference only — confirm before quote Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label Photo slot reserved
Alternator assembly electrical · Engine-mounted	2007-2011 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: SUV Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	Engine family, trim, stop-start/idle-stop and market charging control can change regulator, plug and rated output. Accord/Civic/CR-V petrol and hybrid systems require separate checks. Checks: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Interchange: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Reference only — confirm before quote Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record Photo slot reserved
Front headlamp assembly lighting · LH/RH	2007-2011 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: SUV Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	US, Japan, EU and other-market lamps can differ in beam pattern, DRL, side marker, AFS and connector. Sedan, coupe, hatchback and SUV body variants require separate verification. Checks: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Interchange: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Reference only — confirm before quote Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison Photo slot reserved

Part	Years / engine	Drive / body / steering	Reference parameters	Market differences and checks	Status / source
Front bumper cover body · Front	2012-2016 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: SUV Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	North American, Japanese, European and other-market bumpers may differ in side markers, plate recess, fog lamps, radar and pedestrian-safety interfaces. Body style and Sport/standard trim must be confirmed. Checks: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Interchange: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Reference only — confirm before quote Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check Photo slot reserved
A/C compressor assembly climate · Engine-mounted	2012-2016 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: SUV Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Engine family, body style, market climate package and compressor control valve can change the correct assembly. Hybrid/electric compressor systems must be separated from belt-driven units. Checks: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Interchange: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Reference only — confirm before quote Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check Photo slot reserved
Radiator and cooling module cooling · Front	2012-2016 Engines: Not provided Transmission: CVT, 6MT, 9AT, 10AT	Drive: 2WD Body: SUV Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Engine displacement, turbo/non-turbo, CVT/automatic transmission and hybrid equipment can change radiator and fan assemblies. Market emissions and condenser/fan-control packages must be checked separately. Checks: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Interchange: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Reference only — confirm before quote Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label Photo slot reserved
Alternator assembly electrical · Engine-mounted	2012-2016 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: SUV Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	Engine family, trim, stop-start/idle-stop and market charging control can change regulator, plug and rated output. Accord/Civic/CR-V petrol and hybrid systems require separate checks. Checks: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Interchange: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Reference only — confirm before quote Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record Photo slot reserved
Front headlamp assembly lighting · LH/RH	2012-2016 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: SUV Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	US, Japan, EU and other-market lamps can differ in beam pattern, DRL, side marker, AFS and connector. Sedan, coupe, hatchback and SUV body variants require separate verification. Checks: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Interchange: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Reference only — confirm before quote Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison Photo slot reserved

Part	Years / engine	Drive / body / steering	Reference parameters	Market differences and checks	Status / source
Front bumper cover body · Front	2017-2022 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: SUV Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	North American, Japanese, European and other-market bumpers may differ in side markers, plate recess, fog lamps, radar and pedestrian-safety interfaces. Body style and Sport/standard trim must be confirmed. Checks: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Interchange: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Reference only — confirm before quote Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check Photo slot reserved
A/C compressor assembly climate · Engine-mounted	2017-2022 Engines: L15B7 Transmission: Not provided	Drive: 2WD Body: SUV Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Engine family, body style, market climate package and compressor control valve can change the correct assembly. Hybrid/electric compressor systems must be separated from belt-driven units. Checks: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Interchange: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Reference only — confirm before quote Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check Photo slot reserved
Radiator and cooling module cooling · Front	2017-2022 Engines: L15B7 Transmission: CVT, 6MT, 9AT, 10AT	Drive: 2WD Body: SUV Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Engine displacement, turbo/non-turbo, CVT/automatic transmission and hybrid equipment can change radiator and fan assemblies. Market emissions and condenser/fan-control packages must be checked separately. Checks: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Interchange: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Reference only — confirm before quote Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label Photo slot reserved
Alternator assembly electrical · Engine-mounted	2017-2022 Engines: L15B7 Transmission: Not provided	Drive: 2WD Body: SUV Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	Engine family, trim, stop-start/idle-stop and market charging control can change regulator, plug and rated output. Accord/Civic/CR-V petrol and hybrid systems require separate checks. Checks: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Interchange: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Reference only — confirm before quote Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record Photo slot reserved
Front headlamp assembly lighting · LH/RH	2017-2022 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: SUV Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	US, Japan, EU and other-market lamps can differ in beam pattern, DRL, side marker, AFS and connector. Sedan, coupe, hatchback and SUV body variants require separate verification. Checks: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Interchange: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Reference only — confirm before quote Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison Photo slot reserved

Part	Years / engine	Drive / body / steering	Reference parameters	Market differences and checks	Status / source
Front bumper cover body · Front	2006-2011 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: sedan Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	North American, Japanese, European and other-market bumpers may differ in side markers, plate recess, fog lamps, radar and pedestrian-safety interfaces. Body style and Sport/standard trim must be confirmed. Checks: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Interchange: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Reference only — confirm before quote Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check Photo slot reserved
A/C compressor assembly climate · Engine-mounted	2006-2011 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: sedan Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Engine family, body style, market climate package and compressor control valve can change the correct assembly. Hybrid/electric compressor systems must be separated from belt-driven units. Checks: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Interchange: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Reference only — confirm before quote Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check Photo slot reserved
Radiator and cooling module cooling · Front	2006-2011 Engines: Not provided Transmission: CVT, 6MT, 9AT, 10AT	Drive: 2WD Body: sedan Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Engine displacement, turbo/non-turbo, CVT/automatic transmission and hybrid equipment can change radiator and fan assemblies. Market emissions and condenser/fan-control packages must be checked separately. Checks: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Interchange: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Reference only — confirm before quote Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label Photo slot reserved
Alternator assembly electrical · Engine-mounted	2006-2011 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: sedan Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	Engine family, trim, stop-start/idle-stop and market charging control can change regulator, plug and rated output. Accord/Civic/CR-V petrol and hybrid systems require separate checks. Checks: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Interchange: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Reference only — confirm before quote Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record Photo slot reserved
Front headlamp assembly lighting · LH/RH	2006-2011 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: sedan Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	US, Japan, EU and other-market lamps can differ in beam pattern, DRL, side marker, AFS and connector. Sedan, coupe, hatchback and SUV body variants require separate verification. Checks: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Interchange: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Reference only — confirm before quote Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison Photo slot reserved

Part	Years / engine	Drive / body / steering	Reference parameters	Market differences and checks	Status / source
Front bumper cover body · Front	2012-2015 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: sedan Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	North American, Japanese, European and other-market bumpers may differ in side markers, plate recess, fog lamps, radar and pedestrian-safety interfaces. Body style and Sport/standard trim must be confirmed. Checks: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Interchange: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Reference only — confirm before quote Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check Photo slot reserved
A/C compressor assembly climate · Engine-mounted	2012-2015 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: sedan Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Engine family, body style, market climate package and compressor control valve can change the correct assembly. Hybrid/electric compressor systems must be separated from belt-driven units. Checks: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Interchange: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Reference only — confirm before quote Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check Photo slot reserved
Radiator and cooling module cooling · Front	2012-2015 Engines: Not provided Transmission: CVT, 6MT, 9AT, 10AT	Drive: 2WD Body: sedan Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Engine displacement, turbo/non-turbo, CVT/automatic transmission and hybrid equipment can change radiator and fan assemblies. Market emissions and condenser/fan-control packages must be checked separately. Checks: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Interchange: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Reference only — confirm before quote Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label Photo slot reserved
Alternator assembly electrical · Engine-mounted	2012-2015 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: sedan Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	Engine family, trim, stop-start/idle-stop and market charging control can change regulator, plug and rated output. Accord/Civic/CR-V petrol and hybrid systems require separate checks. Checks: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Interchange: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Reference only — confirm before quote Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record Photo slot reserved
Front headlamp assembly lighting · LH/RH	2012-2015 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: sedan Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	US, Japan, EU and other-market lamps can differ in beam pattern, DRL, side marker, AFS and connector. Sedan, coupe, hatchback and SUV body variants require separate verification. Checks: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Interchange: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Reference only — confirm before quote Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison Photo slot reserved

Part	Years / engine	Drive / body / steering	Reference parameters	Market differences and checks	Status / source
Front bumper cover body · Front	2016-2021 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: sedan Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	North American, Japanese, European and other-market bumpers may differ in side markers, plate recess, fog lamps, radar and pedestrian-safety interfaces. Body style and Sport/standard trim must be confirmed. Checks: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Interchange: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Reference only — confirm before quote Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check Photo slot reserved
A/C compressor assembly climate · Engine-mounted	2016-2021 Engines: L15B7 Transmission: Not provided	Drive: 2WD Body: sedan Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Engine family, body style, market climate package and compressor control valve can change the correct assembly. Hybrid/electric compressor systems must be separated from belt-driven units. Checks: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Interchange: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Reference only — confirm before quote Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check Photo slot reserved
Radiator and cooling module cooling · Front	2016-2021 Engines: L15B7 Transmission: CVT, 6MT, 9AT, 10AT	Drive: 2WD Body: sedan Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Engine displacement, turbo/non-turbo, CVT/automatic transmission and hybrid equipment can change radiator and fan assemblies. Market emissions and condenser/fan-control packages must be checked separately. Checks: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Interchange: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Reference only — confirm before quote Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label Photo slot reserved
Alternator assembly electrical · Engine-mounted	2016-2021 Engines: L15B7 Transmission: Not provided	Drive: 2WD Body: sedan Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	Engine family, trim, stop-start/idle-stop and market charging control can change regulator, plug and rated output. Accord/Civic/CR-V petrol and hybrid systems require separate checks. Checks: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Interchange: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Reference only — confirm before quote Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record Photo slot reserved
Front headlamp assembly lighting · LH/RH	2016-2021 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: sedan Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	US, Japan, EU and other-market lamps can differ in beam pattern, DRL, side marker, AFS and connector. Sedan, coupe, hatchback and SUV body variants require separate verification. Checks: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Interchange: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Reference only — confirm before quote Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison Photo slot reserved

Part	Years / engine	Drive / body / steering	Reference parameters	Market differences and checks	Status / source
Front bumper cover body · Front	2009-2015 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: SUV Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	Market, body style, trim, facelift, sensor equipment and steering side must be confirmed before interchange. Checks: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Interchange: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Reference only — confirm before quote Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check Photo slot reserved
A/C compressor assembly climate · Engine-mounted	2009-2015 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: SUV Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Hybrid and non-hybrid compressors are different systems; match grade, engine and high-voltage/electric architecture. Checks: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Interchange: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Reference only — confirm before quote Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check Photo slot reserved
Radiator and cooling module cooling · Front	2009-2015 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: SUV Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Engine, transmission, drivetrain, climate package and market equipment must be confirmed from the donor vehicle. Checks: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Interchange: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Reference only — confirm before quote Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label Photo slot reserved
Alternator assembly electrical · Engine-mounted	2009-2015 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: SUV Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	Hybrid and non-hybrid charging systems are different; match the exact grade, engine and electrical architecture. Checks: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Interchange: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Reference only — confirm before quote Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record Photo slot reserved
Front headlamp assembly lighting · LH/RH	2009-2015 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: SUV Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	Market, body style, trim, facelift, steering side and lamp technology must be confirmed from the donor unit. Checks: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Interchange: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Reference only — confirm before quote Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison Photo slot reserved

Part	Years / engine	Drive / body / steering	Reference parameters	Market differences and checks	Status / source
Front bumper cover body · Front	2016-2022 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: SUV Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	Market, body style, trim, facelift, sensor equipment and steering side must be confirmed before interchange. Checks: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Interchange: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Reference only — confirm before quote Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check Photo slot reserved
A/C compressor assembly climate · Engine-mounted	2016-2022 Engines: 2GR-FKS Transmission: Not provided	Drive: 2WD Body: SUV Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Hybrid and non-hybrid compressors are different systems; match grade, engine and high-voltage/electric architecture. Checks: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Interchange: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Reference only — confirm before quote Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check Photo slot reserved
Radiator and cooling module cooling · Front	2016-2022 Engines: 2GR-FKS Transmission: Not provided	Drive: 2WD Body: SUV Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Engine, transmission, drivetrain, climate package and market equipment must be confirmed from the donor vehicle. Checks: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Interchange: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Reference only — confirm before quote Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label Photo slot reserved
Alternator assembly electrical · Engine-mounted	2016-2022 Engines: 2GR-FKS Transmission: Not provided	Drive: 2WD Body: SUV Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	Hybrid and non-hybrid charging systems are different; match the exact grade, engine and electrical architecture. Checks: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Interchange: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Reference only — confirm before quote Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record Photo slot reserved
Front headlamp assembly lighting · LH/RH	2016-2022 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: SUV Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	Market, body style, trim, facelift, steering side and lamp technology must be confirmed from the donor unit. Checks: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Interchange: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Reference only — confirm before quote Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison Photo slot reserved

Part	Years / engine	Drive / body / steering	Reference parameters	Market differences and checks	Status / source
Front bumper cover body · Front	2011-2017 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: sedan Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	US/Canada, Japan, GCC and other-market bumper covers can differ in grille, reflector, fog-lamp, DRL and radar openings. Pre-facelift and facelift parts must be separated even within one chassis code. Checks: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Interchange: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Reference only — confirm before quote Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check Photo slot reserved
A/C compressor assembly climate · Engine-mounted	2011-2017 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: sedan Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Petrol, diesel and hybrid systems can use different compressor brackets, control methods and hose layouts. GCC, African-import, North American and Japanese-market climate packages may differ; country alone is not a fitment key. Checks: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Interchange: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Reference only — confirm before quote Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check Photo slot reserved
Radiator and cooling module cooling · Front	2011-2017 Engines: Not provided Transmission: 6AT, 8AT	Drive: 2WD Body: sedan Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Petrol, hybrid and diesel systems use different cooling layouts; do not merge them. Automatic/CVT oil-cooler fittings and fan control can differ by market and trim. Checks: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Interchange: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Reference only — confirm before quote Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label Photo slot reserved
Alternator assembly electrical · Engine-mounted	2011-2017 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: sedan Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	The same model can use different alternators for petrol/diesel engines, engine displacement, stop-start, market emissions equipment and audio loads. Hybrid vehicles may use a different charging architecture and must not be treated as a conventional alternator match. Checks: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Interchange: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Reference only — confirm before quote Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record Photo slot reserved
Front headlamp assembly lighting · LH/RH	2011-2017 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: sedan Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	North American, Japanese and other-market lamps may differ in beam pattern, DRL, leveling motor, side marker and connector. Facelift and pre-facelift housings must not be mixed without comparing mounting points and OE suffix. Checks: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Interchange: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Reference only — confirm before quote Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison Photo slot reserved

Engine	Displacement	Fuel / induction	Output reference	Transmission / source	Source / photo
2GR-FKS 3.5L V6	3.5 L 6 cylinders	Gasoline Naturally aspirated	301 hp · 362 Nm	8-speed automatic	Photo slot reserved Toyota 2020 Camry Product Information Reference specification · photo slot reserved
A25A-FKS 2.5L Dynamic Force 4-cylinder	2.5 L 4 cylinders	Gasoline Naturally aspirated	203 hp · 249 Nm	8-speed automatic	Photo slot reserved Toyota 2020 Camry Product Information Reference specification · photo slot reserved

Part	Years / engine	Drive / body / steering	Reference parameters	Market differences and checks	Status / source
Front bumper cover body · Front	2017-2024 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: sedan Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	US/Canada, Japan, GCC and other-market bumper covers can differ in grille, reflector, fog-lamp, DRL and radar openings. Pre-facelift and facelift parts must be separated even within one chassis code. Checks: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Interchange: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Reference only — confirm before quote Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check Photo slot reserved
A/C compressor assembly climate · Engine-mounted	2017-2024 Engines: 2GR-FKS, A25A-FKS Transmission: Not provided	Drive: 2WD Body: sedan Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Petrol, diesel and hybrid systems can use different compressor brackets, control methods and hose layouts. GCC, African-import, North American and Japanese-market climate packages may differ; country alone is not a fitment key. Checks: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Interchange: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Reference only — confirm before quote Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check Photo slot reserved
Radiator and cooling module cooling · Front	2017-2024 Engines: 2GR-FKS, A25A-FKS Transmission: 6AT, 8AT	Drive: 2WD Body: sedan Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Petrol, hybrid and diesel systems use different cooling layouts; do not merge them. Automatic/CVT oil-cooler fittings and fan control can differ by market and trim. Checks: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Interchange: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Reference only — confirm before quote Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label Photo slot reserved
Alternator assembly electrical · Engine-mounted	2017-2024 Engines: 2GR-FKS, A25A-FKS Transmission: Not provided	Drive: 2WD Body: sedan Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	The same model can use different alternators for petrol/diesel engines, engine displacement, stop-start, market emissions equipment and audio loads. Hybrid vehicles may use a different charging architecture and must not be treated as a conventional alternator match. Checks: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Interchange: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Reference only — confirm before quote Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record Photo slot reserved
Front headlamp assembly lighting · LH/RH	2017-2024 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: sedan Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	North American, Japanese and other-market lamps may differ in beam pattern, DRL, leveling motor, side marker and connector. Facelift and pre-facelift housings must not be mixed without comparing mounting points and OE suffix. Checks: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Interchange: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Reference only — confirm before quote Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison Photo slot reserved

Part	Years / engine	Drive / body / steering	Reference parameters	Market differences and checks	Status / source
Front bumper cover body · Front	2007-2013 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: sedan Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	US/Canada, Japan, GCC and other-market bumper covers can differ in grille, reflector, fog-lamp, DRL and radar openings. Pre-facelift and facelift parts must be separated even within one chassis code. Checks: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Interchange: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Reference only — confirm before quote Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check Photo slot reserved
A/C compressor assembly climate · Engine-mounted	2007-2013 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: sedan Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Petrol, diesel and hybrid systems can use different compressor brackets, control methods and hose layouts. GCC, African-import, North American and Japanese-market climate packages may differ; country alone is not a fitment key. Checks: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Interchange: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Reference only — confirm before quote Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check Photo slot reserved
Radiator and cooling module cooling · Front	2007-2013 Engines: Not provided Transmission: CVT, 6AT, 6MT	Drive: 2WD Body: sedan Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Petrol, hybrid and diesel systems use different cooling layouts; do not merge them. Automatic/CVT oil-cooler fittings and fan control can differ by market and trim. Checks: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Interchange: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Reference only — confirm before quote Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label Photo slot reserved
Alternator assembly electrical · Engine-mounted	2007-2013 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: sedan Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	The same model can use different alternators for petrol/diesel engines, engine displacement, stop-start, market emissions equipment and audio loads. Hybrid vehicles may use a different charging architecture and must not be treated as a conventional alternator match. Checks: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Interchange: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Reference only — confirm before quote Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record Photo slot reserved
Front headlamp assembly lighting · LH/RH	2007-2013 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: sedan Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	E140/E150, E170 and E210 lamps are not interchangeable by model name alone. NG/GH vehicles can include RHD imports and LHD North American imports; headlamp beam pattern and connector may differ. Sedan, hatchback/wagon, facelift and LED/halogen assemblies require separate confirmation. Checks: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Interchange: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Reference only — confirm before quote Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison Photo slot reserved

Part	Years / engine	Drive / body / steering	Reference parameters	Market differences and checks	Status / source
Front bumper cover body · Front	2013-2019 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: sedan Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	US/Canada, Japan, GCC and other-market bumper covers can differ in grille, reflector, fog-lamp, DRL and radar openings. Pre-facelift and facelift parts must be separated even within one chassis code. Checks: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Interchange: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Reference only — confirm before quote Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check Photo slot reserved
A/C compressor assembly climate · Engine-mounted	2013-2019 Engines: 2ZR-FE Transmission: Not provided	Drive: 2WD Body: sedan Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Petrol, diesel and hybrid systems can use different compressor brackets, control methods and hose layouts. GCC, African-import, North American and Japanese-market climate packages may differ; country alone is not a fitment key. Checks: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Interchange: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Reference only — confirm before quote Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check Photo slot reserved
Radiator and cooling module cooling · Front	2013-2019 Engines: 2ZR-FE Transmission: CVT, 6AT, 6MT	Drive: 2WD Body: sedan Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Petrol, hybrid and diesel systems use different cooling layouts; do not merge them. Automatic/CVT oil-cooler fittings and fan control can differ by market and trim. Checks: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Interchange: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Reference only — confirm before quote Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label Photo slot reserved
Alternator assembly electrical · Engine-mounted	2013-2019 Engines: 2ZR-FE Transmission: Not provided	Drive: 2WD Body: sedan Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	The same model can use different alternators for petrol/diesel engines, engine displacement, stop-start, market emissions equipment and audio loads. Hybrid vehicles may use a different charging architecture and must not be treated as a conventional alternator match. Checks: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Interchange: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Reference only — confirm before quote Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record Photo slot reserved
Front headlamp assembly lighting · LH/RH	2013-2019 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: sedan Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	E140/E150, E170 and E210 lamps are not interchangeable by model name alone. NG/GH vehicles can include RHD imports and LHD North American imports; headlamp beam pattern and connector may differ. Sedan, hatchback/wagon, facelift and LED/halogen assemblies require separate confirmation. Checks: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Interchange: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Reference only — confirm before quote Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison Photo slot reserved

Part	Years / engine	Drive / body / steering	Reference parameters	Market differences and checks	Status / source
Front bumper cover body · Front	2019-2025 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: sedan Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	US/Canada, Japan, GCC and other-market bumper covers can differ in grille, reflector, fog-lamp, DRL and radar openings. Pre-facelift and facelift parts must be separated even within one chassis code. Checks: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Interchange: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Reference only — confirm before quote Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check Photo slot reserved
A/C compressor assembly climate · Engine-mounted	2019-2025 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: sedan Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Petrol, diesel and hybrid systems can use different compressor brackets, control methods and hose layouts. GCC, African-import, North American and Japanese-market climate packages may differ; country alone is not a fitment key. Checks: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Interchange: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Reference only — confirm before quote Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check Photo slot reserved
Radiator and cooling module cooling · Front	2019-2025 Engines: Not provided Transmission: CVT, 6AT, 6MT	Drive: 2WD Body: sedan Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Petrol, hybrid and diesel systems use different cooling layouts; do not merge them. Automatic/CVT oil-cooler fittings and fan control can differ by market and trim. Checks: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Interchange: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Reference only — confirm before quote Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label Photo slot reserved
Alternator assembly electrical · Engine-mounted	2019-2025 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: sedan Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	The same model can use different alternators for petrol/diesel engines, engine displacement, stop-start, market emissions equipment and audio loads. Hybrid vehicles may use a different charging architecture and must not be treated as a conventional alternator match. Checks: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Interchange: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Reference only — confirm before quote Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record Photo slot reserved
Front headlamp assembly lighting · LH/RH	2019-2025 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: sedan Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	E140/E150, E170 and E210 lamps are not interchangeable by model name alone. NG/GH vehicles can include RHD imports and LHD North American imports; headlamp beam pattern and connector may differ. Sedan, hatchback/wagon, facelift and LED/halogen assemblies require separate confirmation. Checks: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Interchange: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Reference only — confirm before quote Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison Photo slot reserved

Part	Years / engine	Drive / body / steering	Reference parameters	Market differences and checks	Status / source
Front bumper cover body · Front	2007-2013 Engines: Not provided Transmission: Not provided	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	Bumper shape and brackets may vary with 2WD/4WD, grade, diesel/petrol, tow package, fog lamps and parking sensors. RHD/LHD and local safety equipment can change the lamp and radar interfaces. Checks: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Interchange: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Reference only — confirm before quote Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check Photo slot reserved
A/C compressor assembly climate · Engine-mounted	2007-2013 Engines: Not provided Transmission: Not provided	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Petrol, diesel and hybrid systems can use different compressor brackets, control methods and hose layouts. GCC, African-import, North American and Japanese-market climate packages may differ; country alone is not a fitment key. Checks: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Interchange: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Reference only — confirm before quote Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check Photo slot reserved
Radiator and cooling module cooling · Front	2007-2013 Engines: Not provided Transmission: 6AT, 8AT	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Petrol, hybrid and diesel systems use different cooling layouts; do not merge them. Automatic/CVT oil-cooler fittings and fan control can differ by market and trim. Checks: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Interchange: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Reference only — confirm before quote Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label Photo slot reserved
Alternator assembly electrical · Engine-mounted	2007-2013 Engines: Not provided Transmission: Not provided	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	The same model can use different alternators for petrol/diesel engines, engine displacement, stop-start, market emissions equipment and audio loads. Hybrid vehicles may use a different charging architecture and must not be treated as a conventional alternator match. Checks: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Interchange: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Reference only — confirm before quote Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record Photo slot reserved
Front headlamp assembly lighting · LH/RH	2007-2013 Engines: Not provided Transmission: Not provided	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	North American, Japanese and other-market lamps may differ in beam pattern, DRL, leveling motor, side marker and connector. Facelift and pre-facelift housings must not be mixed without comparing mounting points and OE suffix. Checks: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Interchange: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Reference only — confirm before quote Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison Photo slot reserved

Engine	Displacement	Fuel / induction	Output reference	Transmission / source	Source / photo
1AR-FE 2.7L 4-cylinder	2.7 L 4 cylinders	Gasoline Naturally aspirated	187 hp · 252 Nm	6-speed automatic	Photo slot reserved Toyota 2015 Highlander Product Information Reference specification · photo slot reserved
2GR-FE 3.5L V6	3.5 L 6 cylinders	Gasoline Naturally aspirated	270 hp · 336 Nm	6-speed automatic	Photo slot reserved Toyota 2015 Highlander Product Information Reference specification · photo slot reserved

Part	Years / engine	Drive / body / steering	Reference parameters	Market differences and checks	Status / source
Front bumper cover body · Front	2005-2015 Engines: Not provided Transmission: Not provided	Drive: 2WD, 4WD Body: pickup Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	Bumper shape and brackets may vary with 2WD/4WD, grade, diesel/petrol, tow package, fog lamps and parking sensors. RHD/LHD and local safety equipment can change the lamp and radar interfaces. Checks: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Interchange: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Reference only — confirm before quote Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check Photo slot reserved
A/C compressor assembly climate · Engine-mounted	2005-2015 Engines: Not provided Transmission: Not provided	Drive: 2WD, 4WD Body: pickup Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Petrol, diesel and hybrid systems can use different compressor brackets, control methods and hose layouts. GCC, African-import, North American and Japanese-market climate packages may differ; country alone is not a fitment key. Checks: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Interchange: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Reference only — confirm before quote Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check Photo slot reserved
Radiator and cooling module cooling · Front	2005-2015 Engines: Not provided Transmission: 6AT, 6MT	Drive: 2WD, 4WD Body: pickup Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Diesel turbo, petrol and high-temperature/towing packages may use different core, fan, oil-cooler and hose arrangements. RHD/LHD generally does not identify the radiator by itself; engine, transmission and donor label are decisive. Checks: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Interchange: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Reference only — confirm before quote Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label Photo slot reserved
Alternator assembly electrical · Engine-mounted	2005-2015 Engines: Not provided Transmission: Not provided	Drive: 2WD, 4WD Body: pickup Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	The same model can use different alternators for petrol/diesel engines, engine displacement, stop-start, market emissions equipment and audio loads. Hybrid vehicles may use a different charging architecture and must not be treated as a conventional alternator match. Checks: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Interchange: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Reference only — confirm before quote Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record Photo slot reserved
Front headlamp assembly lighting · LH/RH	2005-2015 Engines: Not provided Transmission: Not provided	Drive: 2WD, 4WD Body: pickup, SUV Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	RHD and LHD beam pattern, diesel/petrol trim, grille and bumper interfaces may differ by market. LED, HID and halogen versions are separate assemblies even when the chassis generation matches. Checks: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Interchange: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Reference only — confirm before quote Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison Photo slot reserved

Part	Years / engine	Drive / body / steering	Reference parameters	Market differences and checks	Status / source
Front bumper cover body · Front	2015-2023 Engines: Not provided Transmission: Not provided	Drive: 2WD, 4WD Body: pickup Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	Bumper shape and brackets may vary with 2WD/4WD, grade, diesel/petrol, tow package, fog lamps and parking sensors. RHD/LHD and local safety equipment can change the lamp and radar interfaces. Checks: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Interchange: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Reference only — confirm before quote Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check Photo slot reserved
A/C compressor assembly climate · Engine-mounted	2015-2023 Engines: 1GD-FTV Transmission: Not provided	Drive: 2WD, 4WD Body: pickup Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Petrol, diesel and hybrid systems can use different compressor brackets, control methods and hose layouts. GCC, African-import, North American and Japanese-market climate packages may differ; country alone is not a fitment key. Checks: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Interchange: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Reference only — confirm before quote Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check Photo slot reserved
Radiator and cooling module cooling · Front	2015-2023 Engines: 1GD-FTV Transmission: 6AT, 6MT	Drive: 2WD, 4WD Body: pickup Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Diesel turbo, petrol and high-temperature/towing packages may use different core, fan, oil-cooler and hose arrangements. RHD/LHD generally does not identify the radiator by itself; engine, transmission and donor label are decisive. Checks: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Interchange: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Reference only — confirm before quote Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label Photo slot reserved
Alternator assembly electrical · Engine-mounted	2015-2023 Engines: 1GD-FTV Transmission: Not provided	Drive: 2WD, 4WD Body: pickup Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	The same model can use different alternators for petrol/diesel engines, engine displacement, stop-start, market emissions equipment and audio loads. Hybrid vehicles may use a different charging architecture and must not be treated as a conventional alternator match. Checks: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Interchange: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Reference only — confirm before quote Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record Photo slot reserved
Front headlamp assembly lighting · LH/RH	2015-2023 Engines: Not provided Transmission: Not provided	Drive: 2WD, 4WD Body: pickup, SUV Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	RHD and LHD beam pattern, diesel/petrol trim, grille and bumper interfaces may differ by market. LED, HID and halogen versions are separate assemblies even when the chassis generation matches. Checks: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Interchange: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Reference only — confirm before quote Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison Photo slot reserved

Part	Years / engine	Drive / body / steering	Reference parameters	Market differences and checks	Status / source
Front bumper cover body · Front	2007-2021 Engines: Not provided Transmission: Not provided	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	Bumper shape and brackets may vary with 2WD/4WD, grade, diesel/petrol, tow package, fog lamps and parking sensors. RHD/LHD and local safety equipment can change the lamp and radar interfaces. Checks: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Interchange: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Reference only — confirm before quote Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check Photo slot reserved
A/C compressor assembly climate · Engine-mounted	2007-2021 Engines: 1VD-FTV Transmission: Not provided	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Petrol, diesel and hybrid systems can use different compressor brackets, control methods and hose layouts. GCC, African-import, North American and Japanese-market climate packages may differ; country alone is not a fitment key. Checks: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Interchange: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Reference only — confirm before quote Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check Photo slot reserved
Radiator and cooling module cooling · Front	2007-2021 Engines: 1VD-FTV Transmission: 6AT, 8AT	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Diesel turbo, petrol and high-temperature/towing packages may use different core, fan, oil-cooler and hose arrangements. RHD/LHD generally does not identify the radiator by itself; engine, transmission and donor label are decisive. Checks: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Interchange: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Reference only — confirm before quote Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label Photo slot reserved
Alternator assembly electrical · Engine-mounted	2007-2021 Engines: 1VD-FTV Transmission: Not provided	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	The same model can use different alternators for petrol/diesel engines, engine displacement, stop-start, market emissions equipment and audio loads. Hybrid vehicles may use a different charging architecture and must not be treated as a conventional alternator match. Checks: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Interchange: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Reference only — confirm before quote Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record Photo slot reserved
Front headlamp assembly lighting · LH/RH	2007-2021 Engines: Not provided Transmission: Not provided	Drive: 2WD, 4WD Body: pickup, SUV Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	RHD and LHD beam pattern, diesel/petrol trim, grille and bumper interfaces may differ by market. LED, HID and halogen versions are separate assemblies even when the chassis generation matches. Checks: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Interchange: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Reference only — confirm before quote Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison Photo slot reserved

Part	Years / engine	Drive / body / steering	Reference parameters	Market differences and checks	Status / source
Front bumper cover body · Front	2009-2023 Engines: Not provided Transmission: Not provided	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	Bumper shape and brackets may vary with 2WD/4WD, grade, diesel/petrol, tow package, fog lamps and parking sensors. RHD/LHD and local safety equipment can change the lamp and radar interfaces. Checks: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Interchange: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Reference only — confirm before quote Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check Photo slot reserved
A/C compressor assembly climate · Engine-mounted	2009-2023 Engines: 1GD-FTV Transmission: Not provided	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Petrol, diesel and hybrid systems can use different compressor brackets, control methods and hose layouts. GCC, African-import, North American and Japanese-market climate packages may differ; country alone is not a fitment key. Checks: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Interchange: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Reference only — confirm before quote Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check Photo slot reserved
Radiator and cooling module cooling · Front	2009-2023 Engines: 1GD-FTV Transmission: 6AT, 8AT	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Diesel turbo, petrol and high-temperature/towing packages may use different core, fan, oil-cooler and hose arrangements. RHD/LHD generally does not identify the radiator by itself; engine, transmission and donor label are decisive. Checks: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Interchange: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Reference only — confirm before quote Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label Photo slot reserved
Alternator assembly electrical · Engine-mounted	2009-2023 Engines: 1GD-FTV Transmission: Not provided	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	The same model can use different alternators for petrol/diesel engines, engine displacement, stop-start, market emissions equipment and audio loads. Hybrid vehicles may use a different charging architecture and must not be treated as a conventional alternator match. Checks: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Interchange: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Reference only — confirm before quote Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record Photo slot reserved
Front headlamp assembly lighting · LH/RH	2009-2023 Engines: Not provided Transmission: Not provided	Drive: 2WD, 4WD Body: pickup, SUV Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	RHD and LHD beam pattern, diesel/petrol trim, grille and bumper interfaces may differ by market. LED, HID and halogen versions are separate assemblies even when the chassis generation matches. Checks: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Interchange: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Reference only — confirm before quote Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison Photo slot reserved

Part	Years / engine	Drive / body / steering	Reference parameters	Market differences and checks	Status / source
Front bumper cover body · Front	2005-2012 Engines: Not provided Transmission: Not provided	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	Bumper shape and brackets may vary with 2WD/4WD, grade, diesel/petrol, tow package, fog lamps and parking sensors. RHD/LHD and local safety equipment can change the lamp and radar interfaces. Checks: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Interchange: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Reference only — confirm before quote Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check Photo slot reserved
A/C compressor assembly climate · Engine-mounted	2005-2012 Engines: Not provided Transmission: Not provided	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Petrol, diesel and hybrid systems can use different compressor brackets, control methods and hose layouts. GCC, African-import, North American and Japanese-market climate packages may differ; country alone is not a fitment key. Checks: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Interchange: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Reference only — confirm before quote Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check Photo slot reserved
Radiator and cooling module cooling · Front	2005-2012 Engines: Not provided Transmission: CVT, 6AT, 6MT	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Petrol, hybrid and diesel systems use different cooling layouts; do not merge them. Automatic/CVT oil-cooler fittings and fan control can differ by market and trim. Checks: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Interchange: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Reference only — confirm before quote Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label Photo slot reserved
Alternator assembly electrical · Engine-mounted	2005-2012 Engines: Not provided Transmission: Not provided	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	The same model can use different alternators for petrol/diesel engines, engine displacement, stop-start, market emissions equipment and audio loads. Hybrid vehicles may use a different charging architecture and must not be treated as a conventional alternator match. Checks: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Interchange: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Reference only — confirm before quote Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record Photo slot reserved
Front headlamp assembly lighting · LH/RH	2005-2012 Engines: Not provided Transmission: Not provided	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	North American, Japanese and other-market lamps may differ in beam pattern, DRL, leveling motor, side marker and connector. Facelift and pre-facelift housings must not be mixed without comparing mounting points and OE suffix. Checks: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Interchange: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Reference only — confirm before quote Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison Photo slot reserved

Part	Years / engine	Drive / body / steering	Reference parameters	Market differences and checks	Status / source
Front bumper cover body · Front	2012-2018 Engines: Not provided Transmission: Not provided	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	Bumper shape and brackets may vary with 2WD/4WD, grade, diesel/petrol, tow package, fog lamps and parking sensors. RHD/LHD and local safety equipment can change the lamp and radar interfaces. Checks: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Interchange: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Reference only — confirm before quote Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check Photo slot reserved
A/C compressor assembly climate · Engine-mounted	2012-2018 Engines: 2AR-FE Transmission: Not provided	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Petrol, diesel and hybrid systems can use different compressor brackets, control methods and hose layouts. GCC, African-import, North American and Japanese-market climate packages may differ; country alone is not a fitment key. Checks: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Interchange: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Reference only — confirm before quote Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check Photo slot reserved
Radiator and cooling module cooling · Front	2012-2018 Engines: 2AR-FE Transmission: CVT, 6AT, 6MT	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Petrol, hybrid and diesel systems use different cooling layouts; do not merge them. Automatic/CVT oil-cooler fittings and fan control can differ by market and trim. Checks: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Interchange: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Reference only — confirm before quote Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label Photo slot reserved
Alternator assembly electrical · Engine-mounted	2012-2018 Engines: 2AR-FE Transmission: Not provided	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	The same model can use different alternators for petrol/diesel engines, engine displacement, stop-start, market emissions equipment and audio loads. Hybrid vehicles may use a different charging architecture and must not be treated as a conventional alternator match. Checks: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Interchange: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Reference only — confirm before quote Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record Photo slot reserved
Front headlamp assembly lighting · LH/RH	2012-2018 Engines: Not provided Transmission: Not provided	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	North American, Japanese and other-market lamps may differ in beam pattern, DRL, leveling motor, side marker and connector. Facelift and pre-facelift housings must not be mixed without comparing mounting points and OE suffix. Checks: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Interchange: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Reference only — confirm before quote Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison Photo slot reserved

Part	Years / engine	Drive / body / steering	Reference parameters	Market differences and checks	Status / source
Front bumper cover body · Front	2018-2025 Engines: Not provided Transmission: Not provided	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	Bumper shape and brackets may vary with 2WD/4WD, grade, diesel/petrol, tow package, fog lamps and parking sensors. RHD/LHD and local safety equipment can change the lamp and radar interfaces. Checks: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Interchange: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Reference only — confirm before quote Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check Photo slot reserved
A/C compressor assembly climate · Engine-mounted	2018-2025 Engines: Not provided Transmission: Not provided	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Petrol, diesel and hybrid systems can use different compressor brackets, control methods and hose layouts. GCC, African-import, North American and Japanese-market climate packages may differ; country alone is not a fitment key. Checks: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Interchange: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Reference only — confirm before quote Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check Photo slot reserved
Radiator and cooling module cooling · Front	2018-2025 Engines: Not provided Transmission: CVT, 6AT, 6MT	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Petrol, hybrid and diesel systems use different cooling layouts; do not merge them. Automatic/CVT oil-cooler fittings and fan control can differ by market and trim. Checks: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Interchange: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Reference only — confirm before quote Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label Photo slot reserved
Alternator assembly electrical · Engine-mounted	2018-2025 Engines: Not provided Transmission: Not provided	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	The same model can use different alternators for petrol/diesel engines, engine displacement, stop-start, market emissions equipment and audio loads. Hybrid vehicles may use a different charging architecture and must not be treated as a conventional alternator match. Checks: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Interchange: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Reference only — confirm before quote Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record Photo slot reserved
Front headlamp assembly lighting · LH/RH	2018-2025 Engines: Not provided Transmission: Not provided	Drive: 2WD, 4WD Body: SUV Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	North American, Japanese and other-market lamps may differ in beam pattern, DRL, leveling motor, side marker and connector. Facelift and pre-facelift housings must not be mixed without comparing mounting points and OE suffix. Checks: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Interchange: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Reference only — confirm before quote Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison Photo slot reserved

Part	Years / engine	Drive / body / steering	Reference parameters	Market differences and checks	Status / source
Front bumper cover body · Front	2010-2020 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: hatchback Steering: RHD, LHD	material: Usually molded thermoplastic; verify condition and repair history openings: Fog lamp, parking sensor, headlamp washer, grille and tow-hook openings are trim-specific radar: ADAS/radar cutout and bracket must be matched where fitted mounting: Compare side guides, upper/lower retainers and undertray interfaces finish: Raw, primed and painted surfaces are different sale conditions	Market, body style, trim, facelift, sensor equipment and steering side must be confirmed before interchange. Checks: Confirm VIN/year, generation, body style, facelift, trim, fog-lamp/DRL openings, parking-sensor count and location, radar/washer openings, side guides, brackets and finish condition. Interchange: Bumper cover is not a complete front-end package. Do not include grille, reinforcement, absorber, lamps, brackets or sensors unless the listing says so.	Reference only — confirm before quote Vehicle and market reference; exact bumper interchange requires physical interface check · Vehicle and market reference; exact bumper interchange requires physical interface check Photo slot reserved
A/C compressor assembly climate · Engine-mounted	2010-2020 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: hatchback Steering: RHD, LHD	compressor_type: Identify fixed-displacement, variable-displacement or electric compressor from the unit label refrigerant: Verify the vehicle label and service specification; do not infer from country or model name oil: Confirm specified oil type and charge procedure pulley: Check pulley diameter, groove count, clutch and belt alignment ports: Compare suction/discharge port orientation and hose fittings connector: Match clutch, control-valve or high-voltage connector as applicable	Petrol, diesel and hybrid systems can use different compressor brackets, control methods and hose layouts. GCC, African-import, North American and Japanese-market climate packages may differ; country alone is not a fitment key. Checks: Confirm OE number, engine code, compressor label, mounting bracket, pulley/clutch, ports, connector, refrigerant/oil specification and leak/rotation test. Interchange: An A/C compressor does not include the condenser, receiver-drier, expansion valve, hoses or refrigerant charge unless explicitly stated.	Reference only — confirm before quote Vehicle and market reference; A/C fitment requires compressor label and service-specification check · Vehicle and market reference; A/C fitment requires compressor label and service-specification check Photo slot reserved
Radiator and cooling module cooling · Front	2010-2020 Engines: Not provided Transmission: CVT, 6AT, 6MT	Drive: 2WD Body: hatchback Steering: RHD, LHD	core: Match engine family and radiator core dimensions from the donor transmission_cooler: Check integrated AT/CVT oil cooler ports and hose routing fan: Fan shroud, motor voltage, control module and connector are separate checks connections: Compare upper/lower hose necks, overflow port, drain position and mounting brackets dimensions: Record width, height, thickness and mounting-center distances from the actual part	Engine, transmission, drivetrain, climate package and market equipment must be confirmed from the donor vehicle. Checks: Confirm engine code, transmission type, radiator dimensions, hose neck diameter/position, cooler ports, fan/shroud, connector, pressure cap, brackets and donor label. Interchange: Radiator, condenser, intercooler, fan shroud and cooling fan are separate components unless explicitly sold as a module.	Reference only — confirm before quote Vehicle and engine reference; cooling-part parameters require donor measurement and OE label · Vehicle and engine reference; cooling-part parameters require donor measurement and OE label Photo slot reserved
Alternator assembly electrical · Engine-mounted	2010-2020 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: hatchback Steering: RHD, LHD	rating: Read rated amperage and regulator code from the alternator label mounting: Bracket ears, pivot spacing and belt-line position must match pulley: Check pulley diameter, groove count, one-way clutch and freewheel direction connector: Compare regulator plug shape and terminal count control: Smart-charge/LIN control, conventional regulator and hybrid DC-DC systems are not interchangeable	The same model can use different alternators for petrol/diesel engines, engine displacement, stop-start, market emissions equipment and audio loads. Hybrid vehicles may use a different charging architecture and must not be treated as a conventional alternator match. Checks: Confirm engine code, OE number, rated amperage, regulator/plug, mounting ears, pulley, belt type, rotation, battery/charging warning history and test result. Interchange: Do not use rated amperage alone to claim interchangeability. A matching current rating does not prove bracket, pulley, plug or regulator compatibility.	Reference only — confirm before quote Vehicle and engine reference; electrical fitment requires alternator label and bench-test record · Vehicle and engine reference; electrical fitment requires alternator label and bench-test record Photo slot reserved
Front headlamp assembly lighting · LH/RH	2010-2020 Engines: Not provided Transmission: Not provided	Drive: 2WD Body: hatchback Steering: RHD, LHD	component: Complete lamp housing position: LH/RH technology: Halogen, LED, DRL or adaptive module must be identified from the donor connector: Match plug shape and pin layout leveling: Check manual/electric leveling motor and ballast/module inclusion included: Housing only unless the listing explicitly includes bulbs, ballast, module or harness dimensions: Use donor housing and mounting points; do not infer dimensions from model name	Market, body style, trim, facelift, steering side and lamp technology must be confirmed from the donor unit. Checks: Confirm vehicle year, generation, body style, steering side, lamp technology, OE suffix, plug/pin count, mounting tabs and included modules. Compare the donor photo before quoting. Interchange: Do not treat a visual similarity or chassis-generation match as interchangeability. Match the OE suffix, housing tabs, plug, ballast/LED module and beam orientation.	Reference only — confirm before quote Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison · Vehicle and market reference; exact lamp fitment requires donor label/VIN and physical comparison Photo slot reserved